2

The faucet runs even when the handles are turned off so I wanted to pull these off and see if I could figure out what is going on...

but I have no idea how to get the faucets off. No visible set screws.

The rings above the conical base pop up then the conical base turns about 2 full revolutions then stops. Is it possible these things are just press on?

EDIT: found the set screws, but it did just slide off. With the ring above the conical part moved, and the conical part screwed all the way down, a small set screw was revealed!

enter image description here

enter image description here

Improve this question
3
  • Have you checked for Allen/set screws?
    – Pᴀᴜʟsᴛᴇʀ2
    Commented Feb 19, 2015 at 1:56
  • Yep, as I mention in the post, there are no visible set screws that I can see.
    – andy mcevoy
    Commented Feb 19, 2015 at 3:09
  • Figured it out, see edit to original post.
    – andy mcevoy
    Commented Feb 19, 2015 at 4:44

0

Reset to default

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Browse other questions tagged or ask your own question.