0

I bought a GE whole home water filter to install (GXWH35F) and am trying to figure out which one of these lines I need to install it on. I'm guessing the red pipe is hot water out of the heater. I was expecting a line in and two lines out but this is all I can see. Both pipes run behind the water heater and under the house.

Finally, the filter is meant to be mounted to the wall. Could I reroute these pipes to run horizontal and then back down to install the filter?

enter image description here

enter image description here

enter image description here

Improve this question
1
  • Where is the main shutoff to the house? Any possibility of mounting it there?
    – JACK
    Commented Aug 28, 2023 at 14:45

1 Answer 1

Reset to default
2

If you are trying to filter the whole house you need the line upsteam of where it branches to the water heater. Anything in this area would only filter hot water. It sounds to me like this is probably under your house.

Improve this answer

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.