I bought a lamp that I see needs a 3-way bulb. I don't really know what that means, but I see that the switch turns three times. Is using a regular bulb in it dangerous?
1
-
1By the way, GE makes a most exceedingly excellent 3-way bulb. It is LED and is "150W equivalent" at the high setting. The trick is, it switches Low-High-Medium, which means if you put it in a simple 1-way socket, you get full brightness. Not cheap but the quality is so good that you only have to buy it once.– Harper - Reinstate MonicaCommented Jan 17, 2021 at 19:36
Add a comment
|
2 Answers
Most of the time, with most 3-way sockets and most "one-way" light bulbs, it's fine, other than you click a few extra times to turn it on and off.
Some of the time, due to manufacturing tolerances and the like, there can be a problem with the contact for the intermediate ring shorting out as you switch through the 3-way settings. It's not terribly common, but I have seen it happen more than once.
-
But other than shorting you have not seen any fires or anything of that sort?– BurtCommented Jan 17, 2021 at 13:44
-
does doing this, cause any light flickering issues? and how often do you see this "some of the time shorting issue" ? Commented Mar 9 at 0:59
a three way bulb has an extra filament and provides 3 brightness levels, if you use a regular bulb it will work ok, but only give one brightness level.
-
1Sounds like a brake light lamp for a car, where there is one ground and two live connections, each connected to a filament of different brightness.– CriggieCommented Jan 17, 2021 at 11:43