2

First of all, I'm a bit embarrassed I cannot figure this out myself. I have looked up Youtube videos, Google searched but I didn't find any exact video.

Plus I have tried pressing it hard, lifting but it seems very hard - just hurts my thumb. I don't want to call an electrician or tell my landlord but I can't sleep with this chirp going on as well. Can anyone help?

t

Improve this question
3
  • 1
    There's a possibility of a pin that keeps the battery hatch "locked". (It's a landlord thing where they don't want tenants tampering.)
    – Aloysius Defenestrate
    Commented Mar 27, 2020 at 22:57
  • Where can that pin be?
    – user113871
    Commented Mar 27, 2020 at 23:02
  • Also, looking at the manual if there was a pin - I wouldn't have been able to turn and remove it.
    – user113871
    Commented Mar 27, 2020 at 23:08

3 Answers 3

Reset to default
1

Push the tab toward the arrow and then lift it up. Good luck

Improve this answer
3
  • How can I tell the model number of this? Btw, I tried pushing the tab but it just doesn't move or shift.
    – user113871
    Commented Mar 27, 2020 at 23:08
  • Does it also mean the whole alarm should have been replaced by 2014?
    – user113871
    Commented Mar 27, 2020 at 23:14
  • yes, they are good for 10 years and then need to be replaced. It's about the sensor life span. Just replace it
    – Ack
    Commented Mar 27, 2020 at 23:15
1

You might want to check a calander!

enter image description here

contact your municipal authprity for instructions on how to correctly dispose of radioactive spmoke alarms.

Improve this answer
0

Push tab in the other direction, then lift

Improve this answer
1
  • 1
    It worked. Cool.
    – user113871
    Commented Mar 27, 2020 at 23:17

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.