Skip to main content
Synthetix's user avatar
Synthetix's user avatar
Synthetix's user avatar
Synthetix
  • Member for 4 years, 8 months
  • Last seen more than 1 year ago
awarded
awarded
comment
Installing a sectioned garage door that's slightly wider than the opening
Ah, that's interesting. I didn't even consider that. I think with the addition of 2x6 planks on the sides, I should be okay. It'll probably look better, too!
comment
Installing a sectioned garage door that's slightly wider than the opening
Thanks! I am totally fine adding the 2x6s, in fact I'm pretty sure the installation instructions for the door tell you to do this. I'll be thrilled to finally replace the existing door.
Loading…
Loading…
awarded
awarded
awarded
comment
Need to hang 60 lb water heater on exterior stucco wall
It's an outdoor tankless heater, so it's designed specifically to mount outside. It's a shame the manufacturer didn't make the mounting bracket 1" longer and put it on 16" centers!
Loading…
awarded
comment
comment
Installing a tankless water heater next to electric service panel
@ThreePhaseEel The heater depth is about 10.75" from the wall, and the electrical panel depth is about 6".
awarded
comment
Installing a tankless water heater next to electric service panel
Since this is an exterior mounted tankless heater, the vent is on the front of the unit, facing outwards away from the house.
comment
Installing a tankless water heater next to electric service panel
@GeorgeAnderson The heater will vent directly to the outside, as the exhaust outlet is on the front. There needs to be 12" of space between the vent and an open window.
comment