0

I own this Infinity satellite surrounding speakers and few days ago one of it rattles like its voice coil come loose and rubbing the magnetic gap.

I wanted to dismantle its cabinet to change the speaker driver but unfortunately this cabinet looks like glued.

I appreciate any information on how to get this thing opened with minimum or no damage on its surface.

enter image description here

enter image description here

enter image description here

enter image description here

  • How about a pic from the front? I have repaired speaker cones on several occasions and have always accessed them from the front side. – Jimmy Fix-it Sep 4 '16 at 16:23
  • I have loaded the picture from the front. Should I pry open the metal grill? My concern is the dents might be very obvious.. – soosai steven Sep 4 '16 at 17:24
  • IMO you should gently pry up the metal grill around its perimeter, it is likely that it's just pressed into place. You should find the speaker units attached to a face-board with screws, and will be removable from the front for servicing/replacement. – Jimmy Fix-it Sep 4 '16 at 18:32
  • Thanks for your advice. I will try to pull it using wire hook, hopefully it come out easily. – soosai steven Sep 4 '16 at 18:35
  • You might try a hair dryer to warm up any glue before prying. – Aloysius Defenestrate Sep 4 '16 at 20:25

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Browse other questions tagged or ask your own question.