0

We have a GE Harmony washing machine. Recently the drain hose sprung a leak at the base. No issues with the connection to the machine, its strictly the hose. We bought both generic hose attachments from Lowes. One is too big, one is too small. There are no other options at our Lowes to try. I looked up our model and make on online to find one to buy, but its a different connection than what we have for a hose at the base. The model online shows it connecting into the machine while ours fits over a hard plastic part sticking out of the washer.

Model: PTWN8050ZM0WW https://www.geapplianceparts.com/store/parts/assembly/PTWN8050M0WW?ModelType=ModelType Hose suggested: https://www.geapplianceparts.com/store/parts/spec/WH41X10096 Does not fit.

Improve this question
2
  • Your best bet is to contact GE service.
    – Barry
    Commented Nov 26, 2022 at 0:11
  • We finally figured it out. The problem came from the amount of water pressure. The city had recently changed something upstream in the system and someone came by to tell us. Once they did they alerted us they'd be correcting it and now alls right again.
    – Huginn
    Commented Jul 19, 2023 at 17:50

1 Answer 1

Reset to default
0

City messed with our pressure. :|

Improve this answer
1
  • You can vote for/checkmark your own answer to close this out cleanly
    – keshlam
    Commented Jul 19, 2023 at 18:18

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.