1

I have a dip around one of my downspouts and I have a lot of water gathering in that area when it rains. It's coming from gutter downspout and neighbors gutters. I want to install water collector (catch basin) in that area and attach my downspout to it as well. I want to direct all this water to the back side of my backyard away from the house(I have landscape inclination towards that area).

  1. Do I need a french drain for that (corrugated drain pipe with fabric filter and stone) or I can just use 4'' pipe without holes in it just to move the water away and maybe add a water collector in the end with stones?
  2. What are consequences if I use drain pipe with holes wrapped in fabric but without stones? (I don't wanna use that much stone for the project) As I understand the worst can happen is the water won't escape from holes fast enough but the pipe won't clogged, right?
1
  • It's not really a downhill, there is a hill before the dip which is not allowing water to go away from the house :) that's why I wanna install a drain there
    – Rainmaker
    Commented Jun 30, 2021 at 19:53

1 Answer 1

2

No one needs a French drain. You can move the water however you like. BTW, a French drain is simply an underground drain that surfaces somewhere. It has nothing to do with types of pipe or socks.

Corrugated pipe, even with a sock, can certainly silt in over time without enough slope. The sock isn't magic. If there's a low/slow spot and suspended particles can settle out, it'll fill up within a few years. That's the primary reason for using a bed of washed rock--to delay the inevitable. It also creates reservoir space for drain water, but if you daylight the drain that's probably not important here.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.