Timeline for Low water pressure at toilets after main supply valve replacement
Current License: CC BY-SA 3.0
3 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| May 22, 2016 at 12:20 | comment | added | Iggy | Yep, you, J. Stan, Jimmy & Ed are quite correct on the simple debris stuff, but only the first singular fixture used would get the drop problem. However, no-one addressed how "everything at once" would suddenly have a drop. Only If, the Main & its supply-line were 3/4" & everything afterward was 1/2" would the Asker have no difference with the SharkBites. Just my experience & what I saw no-one else addressed from lack of knowledge. SharkBites are horrible creatures if they aren't used at just the fixture ends where the volume will be rightly reduced by the fixture or its supply lines anyhow. | |
| May 20, 2016 at 17:50 | comment | added | wallyk | The Sharkbite may be all that intentionally changed, but taking apart and reassembling plumbing causes all kinds of troubles by sediment and debris even when nothing has been changed. | |
| Mar 21, 2016 at 12:31 | history | answered | Iggy | CC BY-SA 3.0 |