Skip to main content

Timeline for Wiring for water heater and dryer

Current License: CC BY-SA 4.0

14 events
when toggle format what by license comment
May 28, 2023 at 10:30 vote accept user162793
May 26, 2023 at 18:49 history edited user162793 CC BY-SA 4.0
added 710 characters in body
May 26, 2023 at 18:28 history edited user162793 CC BY-SA 4.0
added 710 characters in body
May 25, 2023 at 17:51 comment added NoSparksPlease GFCI needed for dryer receptacle since 210.8 now includes laundry area. Not needed if hardwired, but disconnect means would be required. Both water heater and dryer are subject to 422.31 requiring within site of disconnect or breaker, or permanent means in place to lock off breaker.
May 25, 2023 at 13:30 answer added Ecnerwal timeline score: 2
May 25, 2023 at 12:50 comment added isherwood You have a whole lot of questions in one post here. While they're loosely related, that violates site policy. Please revise to narrow the scope of your post. See How to Ask and take the tour. It's fine to post a series of questions.
May 25, 2023 at 12:48 history edited isherwood CC BY-SA 4.0
deleted 4 characters in body
May 25, 2023 at 12:39 comment added user162793 There is only one 90 degree bend at the top right. The one on the top left will be a type-T conduit body. The line on top is a straight line. It appears like that on the photo because it was shot as panorama.
May 25, 2023 at 12:34 history edited user162793 CC BY-SA 4.0
added 4 characters in body
May 25, 2023 at 12:27 comment added HABO IIRC, you need a pull point every 180 degrees (max) of bends in a conduit. It doesn't need to be a junction box, but it does need to provide access. See Do separate pieces of EMT conduit qualify as "pull points"?.
May 25, 2023 at 12:26 history edited user162793 CC BY-SA 4.0
deleted 10 characters in body
May 25, 2023 at 11:28 history edited user162793 CC BY-SA 4.0
added 248 characters in body; edited title
May 25, 2023 at 11:09 history edited user162793 CC BY-SA 4.0
edited body
May 25, 2023 at 10:57 history asked user162793 CC BY-SA 4.0