Timeline for How do I make this let less water in
Current License: CC BY-SA 4.0
9 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Feb 18, 2023 at 22:11 | comment | added | Harper - Reinstate Monica | Is the bowl specifically designed for a high-cistern toilet? If you grab J. random toilet bowl, it's expecting to be attached to a tank in the normal location. That has a HUGE impact on water pressure - water pressure is 1 PSI per 2 feet, so you're tripling the water pressure. It's not a small thing. | |
| Feb 18, 2023 at 20:30 | history | became hot network question | |||
| Feb 18, 2023 at 19:04 | comment | added | brhans | The mechanism we're looking at in your pic is what adjusts the level of water in the tank, but doesn't have all that much effect on how fast it leaves the tank when you flush. You'll need to look at some way of limiting the flapper or whatever your tank has to control the outlet. | |
| Feb 18, 2023 at 15:07 | comment | added | mryan | The ladders not the problem but the ceiling :) | |
| Feb 18, 2023 at 14:30 | comment | added | Ecnerwal | They make ladders to solve the "too high to work on" problem. Use with care. | |
| Feb 18, 2023 at 12:53 | answer | added | JACK | timeline score: 2 | |
| Feb 18, 2023 at 12:37 | comment | added | crip659 | Usually the float is adjustable so you can adjust it to have less water in the tank. The height of tank also adds to the force, so if the tank was lower should be less force, but that might be harder to fix. The flush itself is usually just an open or close valve, but might have some adjustment on how open it gets. | |
| S Feb 18, 2023 at 12:30 | review | First questions | |||
| Feb 18, 2023 at 12:56 | |||||
| S Feb 18, 2023 at 12:30 | history | asked | mryan | CC BY-SA 4.0 |