Timeline for GFCI receptacle not providing power but it doesn't show physical signs of tripping
Current License: CC BY-SA 4.0
11 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jan 10, 2023 at 0:50 | comment | added | Joe | Sorry missed it! | |
| Jan 9, 2023 at 15:40 | comment | added | Logarr | @Joe See my previous comment about load side sticker. It was definitely wired to LINE. Thanks for trying though. | |
| Jan 8, 2023 at 15:54 | comment | added | Joe | make sure you put the hot side on the LINE terminals and not the LOAD terminals | |
| Jan 7, 2023 at 22:41 | answer | added | RMDman | timeline score: 1 | |
| Jan 7, 2023 at 21:27 | comment | added | Logarr | @Milwrdfan Positive. Not only have I not removed the load side sticker, but even if I had it does not explain the lack of continuity between the screw terminals and the slots. | |
| Jan 7, 2023 at 21:23 | answer | added | Milton | timeline score: 2 | |
| Jan 7, 2023 at 21:11 | comment | added | Milwrdfan | Are you sure you have the incoming power connected to the Line side of the GFCI and not the Load connections? | |
| Jan 7, 2023 at 21:01 | history | edited | Logarr | CC BY-SA 4.0 |
Added points about the reset button.
|
| Jan 7, 2023 at 21:00 | comment | added | Logarr | @ThreePhaseEel Yes. There's no indication at any point in the pressing of the reset button that power flows. Receptacle's status light and my tester's lights stay off. | |
| Jan 7, 2023 at 20:56 | comment | added | ThreePhaseEel | Have you tried pressing reset? | |
| Jan 7, 2023 at 20:50 | history | asked | Logarr | CC BY-SA 4.0 |