Timeline for Troubleshooting broken washing machine
Current License: CC BY-SA 4.0
16 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Aug 29, 2022 at 17:15 | comment | added | Hot Licks | Instruction manual -- English section begins with page 18. | |
| Aug 29, 2022 at 15:46 | answer | added | Proline_Fixer | timeline score: 2 | |
| Aug 28, 2022 at 18:37 | comment | added | Solar Mike | So, chase the wires - that will tell you. | |
| Aug 28, 2022 at 17:59 | comment | added | Proline_Fixer | @SolarMike See what you're getting at, it seems securely shutting, but I'm guessing I can't get at the sensor or trigger that determines if the door is closed without going a step further and removing more panels, parts to access it. | |
| Aug 28, 2022 at 17:56 | comment | added | Proline_Fixer | @crip659 There was no washing of the washing machine :-) | |
| Aug 28, 2022 at 14:13 | comment | added | crip659 | Doubt my stuff would look that clean after a good hour of cleaning. | |
| Aug 28, 2022 at 13:53 | comment | added | Solar Mike | That's good, as the doors tend to have a switch associated with them to stop the machine running / filling with the door not closed correctly. | |
| Aug 28, 2022 at 13:51 | comment | added | Proline_Fixer | @crip659 - Thanks for clarifying that. | |
| Aug 28, 2022 at 13:50 | comment | added | Proline_Fixer | @SolarMike - yes it appears to closing and latching correctly. | |
| Aug 28, 2022 at 13:48 | comment | added | Proline_Fixer | @JACK - I had a look over it, but I'll go through each connection one by one. It is indeed very clean! :-) | |
| Aug 27, 2022 at 17:20 | comment | added | JACK | That's gotta be the cleanest, non working washer I've ever seen. | |
| Aug 27, 2022 at 13:17 | comment | added | Solar Mike | Is the door closing and latching correctly? | |
| Aug 27, 2022 at 13:07 | comment | added | crip659 | Hose clamps can usually be reused, but they are inexpensive and replacing with new are not a bad idea. | |
| Aug 27, 2022 at 12:59 | comment | added | JACK | Did you check the control board? Sounds more like a lose connection than a drainage problem. | |
| S Aug 27, 2022 at 12:40 | review | First questions | |||
| Aug 27, 2022 at 13:03 | |||||
| S Aug 27, 2022 at 12:40 | history | asked | Proline_Fixer | CC BY-SA 4.0 |