Skip to main content
13 events
when toggle format what by license comment
Dec 28, 2021 at 22:48 comment added JACK @user45623 I agree with your comments and have used whatever vacuum was handy to cleanup a work area. Your question dealt with how a particular vacuum might respond to load of no load. All vacuums run under some load because of the filters and vacuum bags. Other operating conditions that could damage a vacuum would be stated in the operating instructions. Anything here would be a matter of opinion.
Dec 28, 2021 at 21:55 comment added user45623 @JACK That said, keep in mind that floor vacuums can be used during home improvement, e.g. to vacuum up wood chips, bits of drywall, etc.
Dec 28, 2021 at 21:46 vote accept user45623
Dec 28, 2021 at 21:45 comment added user45623 @JACK Questions about appliances are sometimes on-topic, and there are other questions about vacuums, but I admit I wasn't sure whether this question was on-topic enough.
Dec 28, 2021 at 13:20 comment added JACK I’m voting to close this question because it's not about home improvement.
Dec 28, 2021 at 11:23 answer added Jasen timeline score: 3
Dec 27, 2021 at 23:51 review Close votes
Jan 12, 2022 at 3:02
Dec 27, 2021 at 23:08 answer added slybloty timeline score: 3
Dec 27, 2021 at 22:57 answer added manassehkatz-Moving 2 Codidact timeline score: 1
Dec 27, 2021 at 22:47 comment added jsotola not a home improvement question
Dec 27, 2021 at 22:45 comment added crip659 Would think less air resistance would be good for a vacuum. More air resistance, like sucking your hand over a vacuum hose will damage/overheat the motor. Even the brush motor will not over speed, but keep a constance speed.
Dec 27, 2021 at 22:17 comment added Solar Mike Used a vac to get spiders webs from the ceiling & walls - works fine.
Dec 27, 2021 at 22:14 history asked user45623 CC BY-SA 4.0