Skip to main content
Home Improvement

Return to Question

Bumped by Community user
Bumped by Community user
added 47 characters in body
Source Link
Jo Roman
Jo Roman
  • 1
  • 3

I have purchased a transfer switch,the Reliance Controls Corporation 31406CRK 30 Amp 6-circuit. The panel in question is a ITE Pushmatic, like the one in the picture except it has two main breakers on top of each rail. I plan on using this on six 115 VAC 15 amp circuits; if I have to I guess I could rewire the circuits I need to one side of the panel but just wondering if there is any technical issue with running the transfer wiring to both sides of the panel. I am no electrician but I do have some understanding of the work involved, and I don't think there are any pitfalls; however I know my limitations and rather ask smarter folks than me. Thanksenter image description hereenter image description here

enter image description here

enter image description here

I have purchased a transfer switch,the Reliance Controls Corporation 31406CRK 30 Amp 6-circuit. The panel in question is a ITE Pushmatic, like the one in the picture except it has two main breakers on top of each rail. I plan on using this on six 115 VAC 15 amp circuits; if I have to I guess I could rewire the circuits I need to one side of the panel but just wondering if there is any technical issue with running the transfer wiring to both sides of the panel. I am no electrician but I do have some understanding of the work involved, and I don't think there are any pitfalls; however I know my limitations and rather ask smarter folks than me. Thanksenter image description here

enter image description here

I have purchased a transfer switch,the Reliance Controls Corporation 31406CRK 30 Amp 6-circuit. The panel in question is a ITE Pushmatic, like the one in the picture except it has two main breakers on top of each rail. I plan on using this on six 115 VAC 15 amp circuits; if I have to I guess I could rewire the circuits I need to one side of the panel but just wondering if there is any technical issue with running the transfer wiring to both sides of the panel. I am no electrician but I do have some understanding of the work involved, and I don't think there are any pitfalls; however I know my limitations and rather ask smarter folks than me. Thanksenter image description here

enter image description here

enter image description here

Source Link
Jo Roman
Jo Roman
  • 1
  • 3

Installing a generator transfer switch on an ITE Pushmatic panel

I have purchased a transfer switch,the Reliance Controls Corporation 31406CRK 30 Amp 6-circuit. The panel in question is a ITE Pushmatic, like the one in the picture except it has two main breakers on top of each rail. I plan on using this on six 115 VAC 15 amp circuits; if I have to I guess I could rewire the circuits I need to one side of the panel but just wondering if there is any technical issue with running the transfer wiring to both sides of the panel. I am no electrician but I do have some understanding of the work involved, and I don't think there are any pitfalls; however I know my limitations and rather ask smarter folks than me. Thanksenter image description here

enter image description here