Skip to main content
Home Improvement

Return to Question

added 296 characters in body
Source Link
hookenz
hookenz
  • 982
  • 7
  • 18

I have a Fisher n Paykel OB60SVMX2 oven that I cannot figure out. The manual implies you screw out the cover and pull the bulb out.

The problem is the top heating element does not have enough clearance to remove the bulb cover. It It hits the top element as it comes out. Tilting itthe heating element down doesn't help in any way.

Can I bend the element or canAm I remove the element? How do yousupposed to remove an oven element? Such a bad design to have to remove the element to replace the bulb! It feels wrong. So I'm asking for some wisdom and help here. Any help/hints appreciated

Any help appreciatedPicture now attached. Light is on the right top rear of the oven. The heating element is angled down as far as it goes. When the element is up all the way it still gets in the way of the light cover coming off.

There are two screws that appear to hold something but not clear if that is the element. The two what look like inner screws are more like rivets. It's not clear how that comes out. I'd not be pleased if I have to remove the entire oven to get this out.

enter image description here

I have a Fisher n Paykel OB60SVMX2 oven that I cannot figure out. The manual implies you screw out the cover and pull the bulb out.

The problem is the element does not have enough clearance to remove the cover. It hits the top element as it comes out. Tilting it down doesn't help.

Can I bend the element or can I remove the element? How do you remove an oven element? Such a bad design to have to remove the element to replace the bulb!

Any help appreciated

I have a Fisher n Paykel OB60SVMX2 oven that I cannot figure out. The manual implies you screw out the cover and pull the bulb out.

The problem is the top heating element does not have enough clearance to remove the bulb cover. It hits the top element as it comes out. Tilting the heating element down doesn't help in any way.

Am I supposed to remove an oven element? Such a bad design to have to remove the element to replace the bulb! It feels wrong. So I'm asking for some wisdom and help here. Any help/hints appreciated

Picture now attached. Light is on the right top rear of the oven. The heating element is angled down as far as it goes. When the element is up all the way it still gets in the way of the light cover coming off.

There are two screws that appear to hold something but not clear if that is the element. The two what look like inner screws are more like rivets. It's not clear how that comes out. I'd not be pleased if I have to remove the entire oven to get this out.

enter image description here

added 4 characters in body
Source Link
hookenz
hookenz
  • 982
  • 7
  • 18

I have a Fisher n Paykel OB60SVMX2 oven that I cannot figure out. The manual implies you screw out the cover and pull the bulb out.

The problem is the element does not have enough clearance to remove the cover. It hits the top element as it comes out. Tilting it down doesn't help.

Can I bend the element or can I remove the element? How do you remove an oven element? Such a bad design to have to remove the element to replace the bulb!

Any help appreciated

I have a Fisher n Paykel OB60SVMX2 oven that I cannot figure out. The manual implies you screw out the cover and pull the bulb out.

The problem is the element does not have enough clearance to remove the cover. It hits the element as it comes out. Tilting it down doesn't help.

Can I bend the element or can I remove the element? How do you remove an oven element? Such a bad design to have to remove the element to replace the bulb!

Any help appreciated

I have a Fisher n Paykel OB60SVMX2 oven that I cannot figure out. The manual implies you screw out the cover and pull the bulb out.

The problem is the element does not have enough clearance to remove the cover. It hits the top element as it comes out. Tilting it down doesn't help.

Can I bend the element or can I remove the element? How do you remove an oven element? Such a bad design to have to remove the element to replace the bulb!

Any help appreciated

Source Link
hookenz
hookenz
  • 982
  • 7
  • 18

Can't get the oven light cover off

I have a Fisher n Paykel OB60SVMX2 oven that I cannot figure out. The manual implies you screw out the cover and pull the bulb out.

The problem is the element does not have enough clearance to remove the cover. It hits the element as it comes out. Tilting it down doesn't help.

Can I bend the element or can I remove the element? How do you remove an oven element? Such a bad design to have to remove the element to replace the bulb!

Any help appreciated