Skip to main content
14 events
when toggle format what by license comment
Feb 9, 2021 at 14:15 answer added Bubblesup timeline score: 1
Nov 9, 2020 at 12:00 history tweeted twitter.com/StackDIY/status/1325770113610616833
Nov 9, 2020 at 6:19 answer added rogerdpack timeline score: 0
Aug 29, 2019 at 16:55 comment added Ed Beal I would agree with @Isherwood, try and seal first with a layer of calking if that wont hold pull it down and clean and reseal. As long as the inside finish or porcelain is in good shape a minor repair may last your lifetime. There is very little pressure there lass than 1/2 a pound and probably less than that.
Aug 28, 2019 at 19:44 answer added Iggy timeline score: 2
Aug 28, 2019 at 16:28 comment added Absmith1112 Ok!!! I’ll give the silicone a try and see how it goes! At this point I’m willing to try anything!! Thank you for your help!! 😊
Aug 28, 2019 at 16:24 comment added isherwood I take that back. It's maybe worth smearing a layer of 100% silicone over the joint. Couldn't really hurt. Give it a good day to cure.
Aug 28, 2019 at 16:23 comment added isherwood I don't think I'd try to repair that seal from the outside. I'd look at pulling that channel off, cleaning away the old adhesive, and re-bonding it. I'd use something stronger than silicone. Urethane might work.
Aug 28, 2019 at 16:20 comment added Absmith1112 I don’t think I did, but possibly. Lol. That’s what I get for messing around with something I have no clue about!! I wonder if I could use silicone caulk to try and fix it?
Aug 28, 2019 at 16:14 answer added sfors says reinstate Monica timeline score: 0
Aug 28, 2019 at 16:12 comment added isherwood Seems like your work on the drain may have tweaked the old overflow trough adhesive and cracked it loose. Is that a possibility?
Aug 28, 2019 at 16:12 history edited isherwood CC BY-SA 4.0
edited body; edited tags
Aug 28, 2019 at 16:10 review First posts
Aug 28, 2019 at 19:16
Aug 28, 2019 at 16:06 history asked Absmith1112 CC BY-SA 4.0