maple_shaft's user avatar
maple_shaft's user avatar
maple_shaft's user avatar
maple_shaft
  • Member for 11 years, 11 months
  • Last seen this week
3 votes

How to find joists through sheetmetal ceiling?

1 vote

Removing paint from wood

2 votes

How can one whole group of outlets stop working, but the wires to one plug on one outlet are still hot?

1 vote

Help me fix a gap between tile and baseboard!

3 votes

Ground Wire Installation

5 votes

How many concrete piers do I need to support a 10 x 10 wooden floor supporting a 1600 lb shed?

2 votes

What is the official name for this metal bracket that sits on top of a concrete pier?

2 votes

Does this wiring sound right?

0 votes

Why does the breaker keep tripping on a circuit with two rooms' lights and a sewer pump?

-1 votes

How can I seal the edges of a linoleum floor that possibly contains asbestos?

5 votes

Can I use a 20 amp and a 15 amp breaker on one 12-3 wire split into 2 circuits with a common ground

7 votes

Can I use engineered I joists as studs in a wall?

4 votes

Can my drywall act as an air barrier?

5 votes
Accepted

What type of paint should I use to paint a block foundation wall?

2 votes
Accepted

Do shower water supply line covers need to be sealed or caulked?

4 votes

How do I remove this dimmer light switch cover so I can paint the wall?

2 votes

How can I convert two recessed lights on a single pole switch to two separate lights with light controls?

2 votes

How can I rehang heavy fire doors?

7 votes
Accepted

There's a bunch of unshielded copper wire in a light switch - what is it and what does it do?

0 votes

How do I install a water line for a refrigerator in a galley kitchen?

10 votes

What is a 'grounded neutral' and how bad is it?

1 vote

Is this switch properly grounded?

2 votes
Accepted

What should I check if my chainsaw fails to start?

3 votes

Why does my GFCI receptacle trip when I connect the load wires?

4 votes

Should I put a dimmer switch on a ceiling fan?

4 votes

Can different gauge wiring be used in the same circuit?

1 vote

How to prevent router from grabbing board when doing face moulding?

4 votes

Why is my electric circuit breaker tripping?

0 votes

How should I affix a flat horizontal object to a vertical chain?

3 votes
Accepted

How should I treat a rusty corner bead in the bathroom before covering it again?