Skip to main content
paul's user avatar
paul's user avatar
paul's user avatar
paul
  • Member for 9 years, 2 months
  • Last seen more than 2 years ago
9 votes

I'm building a Deck. Is it cheaper to buy wood from a mill rather than a box store like Home Depot?

7 votes
Accepted

What is this ceiling beam called above interior wall?

6 votes

Re-painting drywall after patching leaves tones

5 votes
Accepted

Shed floor framing out of square 3/4 inch

4 votes
Accepted

What should I do before re-painting my skirting boards?

3 votes

Is exterior paint more protective than stain for protecting a shed from rain/elements?

3 votes

How can I enlarge a doorknob bore with common tools?

3 votes
Accepted

How can I make a rubber cover for my hammer?

3 votes

Do I need to replace a shower tile that has been scratched?

3 votes
Accepted

Understanding why my shower hob is so high

3 votes

Crumbling brickwork on exterior wall

3 votes

New construction, who is responsible for water drainage?

2 votes

What material can be used to bond metal to metal and is removable in the future?

2 votes

Should I put grout or something else between hardwood floor and slate stone gap?

2 votes

Is there a proven technique for removing grout joints without chipping porcelain tiles?

2 votes

Cutting ceiling joist for attic ladder install

2 votes

Generator issues

2 votes
Accepted

How to remove grating from bathroom sink

1 vote

Hanging Large Framed Prints on Plaster

1 vote
Accepted

What is the best way to repair and prevent cracking grout in a shower stall?

1 vote
Accepted

How to attach closet flange to sub floor

1 vote

What's better for outside trim- treated pine 1x4 or painted/primed yellow pine in Houston?

1 vote

How to replace cartridge for this tub valve?

1 vote

Converting closed tread stairs to open tread stairs

1 vote
Accepted

Framing a Wall with a Sloped Ceiling

1 vote

shower pan inspection

1 vote

Roof moss removal?

1 vote

Do i need to worry about leveling the floor if there are dips no more then 1/8 "

1 vote

Building work on concrete in a very wet environment - natural spring

1 vote

How can I use a standard prehung interior door on 2x6 studs?