BrownRedHawk's user avatar
BrownRedHawk's user avatar
BrownRedHawk's user avatar
BrownRedHawk
  • Member for 9 years, 5 months
  • Last seen more than a week ago
36 votes

Exhaust fumes seeping into our 4th floor apartment at night through bathroom and shower vents/fans

7 votes

Why do fire extinguishers lose pressure over time?

6 votes
Accepted

What is the name for a drill bit that makes conical holes?

6 votes
Accepted

Bathroom fan with no outside vent

4 votes

Why does my breaker trip when I turn a light on?

4 votes

What could cause my range burner to be bright red and really hot when the dial is set to low?

3 votes

How much weight can lag screws hold, or how can I support this piece of slate on a wall?

3 votes

How to make 1/4 inch beveled edge on unfinished walnut countertop

3 votes
Accepted

Trace a breaker to what it powers

3 votes
Accepted

Quick flooring for uneven floor

3 votes

Wood Trim that has Come Loose

3 votes

American cockroach. Can it climb on the water pipes to the apartment(flat) at fourth floor?

3 votes
Accepted

How to set stepping stones in steep, loose hillside

3 votes
Accepted

How to cut aluminium chequer plate (with a jigsaw)?

3 votes

Should the oven heating coil stay on the whol time you are baking?

2 votes

How can I make seamless upholstered chair pads?

2 votes

Heater causing dry uncomforatable air

2 votes

How can I plug a hole cut in a window pane for a portable A/C unit?

2 votes

How do I remove wax or Mop-and-Glow from Pergo floors?

2 votes

Leaking Humidifier

2 votes
Accepted

Should I use a wire or soft sponge to clean a solder tip?

2 votes

How can I soundproof my room to reduce street noise?

2 votes
Accepted

How can I fix this hose winder?

2 votes
Accepted

How can I stop the bass from shaking my house?

2 votes

How can I hang a poster on a metallic surface?

2 votes
Accepted

How much upkeep for portable Tri-Fuel generators

2 votes
Accepted

Accounting for warp while welding precise corner joints

2 votes

Can I use epoxy repair putty as a permanent fix for a screwed through water pipe?

1 vote
Accepted

Do I need to treat the ends of PT lumber?

1 vote
Accepted

White spirit and wire wool to remove paint traces from wood