Skip to main content
whatsisname's user avatar
whatsisname's user avatar
whatsisname's user avatar
whatsisname
  • Member for 13 years, 3 months
  • Last seen this week
  • Minnesota
30 votes

Can an ethernet cable look OK to a cheap cable tester but still have a problem?

18 votes
Accepted

Can I screw only the bottom screw into a stud?

11 votes

How can I inspect a table saw blade for damage?

11 votes

Is an ethernet cable threaded inside a metal conduit is more protected from electromagnetic interference?

9 votes

Can studs be 2-4 inches apart?

9 votes
Accepted

What do you call a property with two separate buildings on it?

9 votes

Why do builders say that wet concrete/mortar is not as strong?

8 votes
Accepted

Programming a Honeywell Thermometer -- don't understand why heat is lower than cool?

7 votes
Accepted

Will neodymium magnets harm my power drill battery?

6 votes
Accepted

Why does starter cord pull easily when spark plug is out?

6 votes

Which is the best way to cut holes in drywall to run/fish new electrical wires (Romex) behind walls?

5 votes
Accepted

Does this air compressor fits this nail gun minimum requirements?

5 votes

How can I expand existing holes in MDF by 2/10ths of an inch?

5 votes

How can I mount a large TV over wall molding?

4 votes

Wooden posts for backyard pullup bar

4 votes

In-fridge icemaker makes hollow ice cubes. How to fix?

3 votes

Is it ok to run 14 gauge wire for lighting off of a chain of 12 gauge outlets on a 20 amp breaker?

3 votes

CAT6 Cable crossover with Electric cable

3 votes
Accepted

Will existing holes in drywall compromise ability to bear load?

3 votes

Wiring dedicated circuits for multiple treadmills

3 votes

Can I make a 14' 4x4 used horizontally out of multiple 2x4x8?

2 votes

Should my foundation be wet or dry?

2 votes

Thoughts on building a brace for a heavy chandelier?

2 votes

Best fasteners for french cleat wall

2 votes

Using wood glue instead of fasteners for raised bed garden

2 votes
Accepted

What type of screws should I use to attach a sign to fiber cement siding?

2 votes

What can I use as a guide for my circular saw if I need to rip an 8' segment out of a sheet of plywood?

2 votes

Understanding US Screw Sizes

2 votes

Can I warm up a swimming pool by submerging black-painted milk jugs in it?

1 vote

How can wood be bent this way?