Digital Lightcraft
  • Member for 8 years, 3 months
  • Last seen more than 1 year ago
Without using dowels, how do I join 2x4s edge to edge to be 1.5" x 7"?
4 votes

As you say you want to use screws and it's non-structural, I'd go with: Get some 4" wood screws, drill half way down through the upper piece with a drill slightly bigger than the screw heads, you ...

View answer
What could be causing a dripping sound inside the wall?
0 votes

I would get it looked at, it could be one of 2 things in my opinion: 1: (the bad, but likely) you have a leak in the drain pipe. 2: (the good but unlikely) some sort of build-up is causing a ...

View answer
How can I hide exposed countersunk screws in kitchen cabinets side panel?
-1 votes

I'm not a DIY genius, but I'd go with "filler".

View answer
How do I disinfect a shopvac after possible contamination with hantavirus and other rodent diseases?
-1 votes

I would change all filters, bags etc, clean out all dust that you can, and spray in an amount of liquid disinfectant with the vac running so it dissipates through the system, BEFORE fitting the new ...

View answer