Skip to main content
Chris O's user avatar
Chris O's user avatar
Chris O's user avatar
Chris O
  • Member for 2 years, 8 months
  • Last seen this week
  • Southern CA
25 votes
Accepted

Why do I have extra copper tubing connected to each bathroom sink supply line?

25 votes

How to change upward facing track lights 26 feet above living room?

24 votes

What is this outlet in my garage and can I charge an EV from it?

19 votes

Is it ok that an oven circuit's wire is much larger than the oven's wire?

19 votes

Living room breaker will not turn on after pressure wash

18 votes

Main water supply's grounding wires

17 votes
Accepted

Can I re-terminate this ISDN connector to an RJ45 connector?

16 votes

Should my 240v electric stove be grounded to the neutral like this?

14 votes

Adding wifi router next to structured media enclosure

12 votes
Accepted

Upstairs washer suds coming out of basement sink

11 votes
Accepted

110.15 High-Leg Marking

10 votes

Why would remotes work reliably on one garage door opener, but unreliable on another?

10 votes

Extending wiring - can I redesignate neutral as ground?

9 votes
Accepted

Can you identify what gauge wire this is?

9 votes

Can I run cable through the center of my garage door header?

9 votes

Found a surprise wiring

8 votes

GFCI trips constantly for 4 days, now resets okay

8 votes

Why does the blower on my furnace run after the burner turns off?

8 votes
Accepted

How to remove wood framing from concrete floor

8 votes
Accepted

Can I use a multi-function "clamp" meter to measure resistance?

8 votes

How do I replace this switch/outlet combo?

8 votes

Main Water Line coming into House leaking/rusted out - How to replace and with what?

7 votes
Accepted

How should I connect misaligned round ducts inside a cabinet?

7 votes

Why is my 200 amp home electrical box in the wall being supplied with only 100 amps from the pole/meter?

7 votes
Accepted

Mounting TV into "sideways" studs (3.5" side is facing the wall)

7 votes

Wall is ripping after tv mount

7 votes
Accepted

Irrigation PVC pipes broken - how to fix properly?

6 votes

Can I drill into drywall where HVAC duct lies?

6 votes

Can I use a European dimmer designed for 230 V in the United States with 120 V?

6 votes
Accepted

making concave indentation into end of piece of wood

1
2 3 4 5 6