Skip to main content
5 votes

How to ensure perfectly perpendicular cuts [to a countertop] with a skilsaw?

So you don't go into the cut "blind" not knowing what to expect as a result, if the material is long enough for an extra cut, off set the straight edge an inch or two and cut there. Check ...
Jack's user avatar
  • 35.5k
1 vote
Accepted

How to ensure perfectly perpendicular cuts [to a countertop] with a skilsaw?

The guide does nothing for "perfectly vertical" - that's the setting of the blade to the baseplate of the saw, and should be checked with a square, as the graduations on the saw's scale are ...
Ecnerwal's user avatar
  • 217k

Only top scored, non community-wiki answers of a minimum length are eligible