Search Results
| Search type | Search syntax |
|---|---|
| Tags | [tag] |
| Exact | "words here" |
| Author |
user:1234 user:me (yours) |
| Score |
score:3 (3+) score:0 (none) |
| Answers |
answers:3 (3+) answers:0 (none) isaccepted:yes hasaccepted:no inquestion:1234 |
| Views | views:250 |
| Code | code:"if (foo != bar)" |
| Sections |
title:apples body:"apples oranges" |
| URL | url:"*.example.com" |
| Saves | in:saves |
| Status |
closed:yes duplicate:no migrated:no wiki:no |
| Types |
is:question is:answer |
| Exclude |
-[tag] -apples |
| For more details on advanced search visit our help page | |
Results tagged with connectors
Search options answers only
not deleted
user 155980
3
votes
Do I have to replace junction box to replace outside 4” ultra thin led lights?
Each Ultra thin LED should have an accompanying driver/ j/box.
If you are trying to connect new light to older driver boxes, they may not match.
It is highly unlikely that 6 lights would go out at the …
- 42.8k
4
votes
Accepted
Hose interface between two standards for power washing
There are no standards for tools as you have found out.
Your power washer is a light duty tool intended for "around the house" use.
An undercarriage sprayer is not within the realm of intended uses fo …
- 42.8k
3
votes
Accepted
How can I redirect the output of my pool filter's backwash waste water?
You need to make a trip to the local pool store or check to see if the big box stores have a 2 inch backwash hose. You need a short piece of 2 inch PVC pipe and PVC glue also.
Glue the 2 inch pipe to …
- 42.8k
2
votes
Hot and cold water line 3 inches too short
If you have the normal 3/8 compression connections on the shut off valves, you can use the Flexible 3/8 m/f extentions
If you cannot find the Male/female lines, a female/female line and a male connect …
- 42.8k
3
votes
Accepted
What kind of light fixture connector is this? What can I replace this with?
The orange connector upper most in the picture connects to an "Edison adapter", or a lead that screws into a standard bulb socket.
The other orange lead is to be connected to a battery back up if supp …
- 42.8k
0
votes
How to connect dishwasher drain hose to drain hose extension
It appears you need a short piece of solid pipe and 2 clamps.
Possibly 3/4 CPVC.or any size that fits the rubber ends snug.
Then clamp.
- 42.8k
3
votes
Adding a new sink in a garage to existing plumbing
What you need to use is a combo wye.
It can be a little tricky cutting out a piece of the drain and slipping in the wye, but usually it can be done. Remember to use primer and the correct glue.
- 42.8k