I have a 25 year old gas furnace without A/C. I had a 2 wire basic thermostat that I have replaced the wiring with 5 wires and also a new Nest 3rd generation thermostat. On the wall beside thermostat is a humidifier control to run the fan that connects to terminal "G" in furnace. The new thermostat also requires terminal "G" for the furnace... is it possible to have both the nest and humidifier control connected to "G" terminal in furnace or will something go up in smoke? The nest does not automatically run the fan when humidity increases it only has a setting for a timed control

thank You, Jim Vancouver B.C.