I don't have enough clearance to install a filler plate because of a power meter for load shedding EVSE that touches the electrical panel cover. See photos. What other options do I have? Is welding a previously removed twistout an option?

[![enter image description here][1]][1]
[![enter image description here][2]][2]
[![enter image description here][3]][3]
[![enter image description here][4]][4]
[![enter image description here][5]][5]
[![enter image description here][6]][6]


  [1]: https://i.sstatic.net/delfC.jpg
  [2]: https://i.sstatic.net/p1kzK.jpg
  [3]: https://i.sstatic.net/0hbnW.jpg
  [4]: https://i.sstatic.net/U1Nh9.jpg
  [5]: https://i.sstatic.net/dccAs.jpg
  [6]: https://i.sstatic.net/E4gmZ.jpg