> **I have a oven-induction stove combi ...**

The Netherlands uses a [16A Type F Socket](https://www.worldstandards.eu/electricity/plugs-and-sockets/) which can supply up to 3.68 kW of power.

An oven + induction stove normally need more power than that. For example, some are rated at 12 kW with a 32A fuse (meaning you cant have every element running at full power all at the same time).

In the UK an oven and hob would be on a dedicated 32A circuit permanently hard-wired by an electrician with no plug or socket. This is not regarded as a *portable appliance*.

Check the manual supplied with the item and find out how much current or how much power it actually needs.

Ideally you should consult an electrician. 

In the UK, for example, you need to carry out "[diversity](https://www.flameport.com/electrical_theory/basic_principles/diversity.cs4)" calculations for the circuit which take into account the likelihood of various types of loads being used concurrently.

> **... which has a 4 pin plug**

Posting a photo of that plug would have helped readers better understand what you need help with.

If it is a [USA NEMA 14-50](https://diy.stackexchange.com/q/30926/2815) plug, it may be intended for a **split-phase 60Hz** supply which is not available in Europe (outside US military bases). If so you'd need to ask the manufacturer if the appliance can be used on the type of electrical supply available to you (probably a 230V **single phase 50 Hz** but possibly a **three-phase 50 Hz** system)

> **Can I somehow make that kind of connection using mutiple normal power sockets?**

No. Absolutely not.