Questions tagged [woodworking]

Questions related to making things out of wood.

Filter by
Sorted by
Tagged with
3
votes
4answers
3k views

Is it okay that framing in houses is sloppy?

I've been watching people do framing on residential homes for a while; both in person and on videos. The framing is very "sloppy" compared to watching a craftsman build a cabinet, for example. The ...
3
votes
5answers
3k views

How do I cut lengths of wooden beading lengthwise?

I wish to replace some missing beading in a stairwell. I've only a limited amount of equipment and experience, but I figured I could get a mitre saw and some matching wooden edging and the right stain,...
3
votes
2answers
168 views

Identify part underneath chest

I am trying to find the name for the following part. This is underneath a chest that permits it to be moved effortlessly. I am trying to find this part to replace as they are pretty worn.
3
votes
6answers
43k views

How can I shave about 1/8“ from a 8'x3/4”x1 1/2" strip of oak?

I attached a 8'x3/4"x1 1/2" strip of red oak to the edge of multiple layers of plywood in order to make the plywood more rigid. Altogether, the three layers of plywood are 1 3/8" thick. This means ...
3
votes
3answers
13k views

What type of joint should I use while building a plywood box?

I'm building a trophy. It will consist of two boxes...one slightly smaller than the other and stacked on top of one another. I'm looking for suggestions on how to join the corners of the boxes so ...
3
votes
1answer
2k views

How do I fix a warped kitchen cabinet?

The side wall of the cabinet is slightly warped after I used the high temperature self-clean feature on the oven. This cabinet has three large drawers in it and now they won't close. The wall of the ...
3
votes
4answers
42k views

How do I properly nail two 2x4's at a 90 degree angle?

Nail the horizontal 2x4 into the vertical 2x4 about 1/4 of the way down from the top of the vertical 2x4, so they are at a 90 degree angle. The way I've been nailing this scenario is to just nail ...
3
votes
3answers
10k views

Is it possible to reduce a 1“ thick board to 1”/N boards?

I have some project plans. Most of the project calls for using 1/2" parts. I bought 1" thick wood, which actually only ends up being 7/8" when I measure it (I have heard this is normal). Anyway, ...
3
votes
4answers
28k views

How can I join two pieces of wood at 90 degrees?

I'm trying to make myself a wooden CNC machine. I haven't started on the woodworking yet, as I'm still planning on the easiest way I can construct the machine (newbie here). I'm planning to use 1' x ...
3
votes
3answers
591 views

What tool should I use for carving deep shapes in a desk top?

I am starting a DIY project to create a standing desk. Part of this project involves installing some electronics in the wooden desktop itself. I need to make the following cuts / carvings and am ...
3
votes
3answers
10k views

For pine shelves, do I need to stain before applying polyurethane?

I built some pine shelves. They're pretty, but I don't want them to darken. I'm told I can apply polyurethane to ensure they stay nice and bright. My question is this: do I need to apply some kind of ...
3
votes
1answer
4k views

Is the 60T blade that came with my Dewalt DWS780 miter good for general purpose cutting?

I recently bought a Dewalt DSW780 12" sliding compound miter saw, along with 60T and 96T diablo blades. My question is, should I keep the blades? Is the 60T blade that came with the saw good enough? ...
3
votes
3answers
2k views

Good technique for squaring-up hardwood edges?

I'm building a small shelf for organising my desk, using sections of 42mm*19mm hardwood. I've cut the pieces to appropriate length using a hand saw, allowing some tolerance for the kerf. Now I'd like ...
3
votes
3answers
9k views

Any way to do a mitered corner without a table saw?

I want to use some left over wood from a table i did to build a 1ft^3 storage box to use in the living room. The wood has a beautiful pattern but it is plywood so i do not want to expose the edges. ...
3
votes
2answers
3k views

How to cut curved legs for a table

I'm planning to build a bed-side table and wish to build it with gently curved legs. I'm planning to recycle wood some old hardwood doors by cutting the blocks out with a circular saw, then cutting ...
3
votes
2answers
2k views

Filling holes in a timber workbench top

I got an old workbench with a top made by a pair of railway sleepers (I assume this is timber). It was very old and sticky with paint stains and not very plane at all, so I tried to use a router and a ...
3
votes
3answers
3k views

How to repair a crack along the grain in a solid block of wood from a single tree?

Approximately 3 years ago I purchased a slice of a log, approximately 50 cm (~1.5') wide at the widest place, approximately 2.5-3 meters (~9-10') long, and about 4-5cm thick (I don't have exact ...
3
votes
1answer
14k views

What to use to finish my desk from IKEA?

This may be an easy question, but everything I am finding on the Internet is kind of confusing (I am a computer guy not a carpenter!). Essentially, I want to know what I could use to finish my ...
3
votes
2answers
50k views

real dimensions of 2 by 4 in inches/centimeters [duplicate]

Possible Duplicate: Why are 2“x4”'s really 1.5“x3.5”? Just by looking at a 2 by 4 plank I can tell that it is neither 2in × 4in or 2cm × 4cm. What are its real ...
3
votes
1answer
363 views

Can i use larger/smaller circular saw blades on my circular / plunge / table / miter saw?

I own a plunge saw and a miter saw. Can I use blades from one saw on the other saw?
3
votes
2answers
1k views

Could a spade bit be used to widen an existing hole in a wooden cabinet?

The spade bit which I have is this one.
3
votes
2answers
11k views

Difference wood and deck screws

I'm curious what the difference is between these two screws and when one should be used over the other. And are deck screws also referred to as construction screws? As far as I can tell by visually ...
3
votes
2answers
404 views

Wood Species to replace small bed frame piece

Our bed has a piece that's at most 1 inch by 1 inch by about 6 inches. It's permanently screwed to the headboard and then the side rail gets screwed into it. On one side it's cracked. I want to pick ...
3
votes
2answers
6k views

How to patch a hole in stained wood (oak) so that the patch material matches the wood as close as possible?

I drilled a 1/2" hole into a stained oak board and I want to fill it so that it's as minimally noticeable as possible. Here are the three options I've found so far: Wood putty. This means I'd have ...
3
votes
3answers
10k views

Should I use a hammer or a mallet when driving a chisel?

I'm planning to install a lock into a wooden door and I'll need to cut various holes for the lock body using a chisel. I'll need to use something like a hammer or a mallet to drive the chisel and I'm ...
3
votes
3answers
74 views

How can I change chair straw backing?

I have this chair with a straw backing. I would like to change the straw on my own since the places that do this work charge over $200. Is this something I can do on my own? If so, how can I search ...
3
votes
2answers
121 views

Custom rail for a spiral staircase

I have (foolishly) bought an oak spiral staircase on craigslist. I was able to use the treads OK, but I'm completely unable to fit the rail that came with it. So I need to construct a custom one. I'm ...
3
votes
2answers
834 views

How can I clamp two 325 mm planks while gluing them together?

I have a base that is 650mm deep. I'm going to have to glue several planks together to get this depth and, eventually, the last two to make the 650mm base. The problem is, I don't have (and can't ...
3
votes
3answers
836 views

Stain-grade wood repair for door mullion?

One of our dogs apparently had a teething problem while we were out working in the garden, and decided to work it out on the wooden door's mullion. The mullion has been rather decreased in the process....
3
votes
2answers
8k views

How can I make trapezoid-shaped wood board (beveled edges)?

The reason why I want this is somewhat difficult to explain. I basically am looking for moulding-sized planks that have a trapezoid shape like this: That's the best trapezoid shape I could find, but ...
3
votes
2answers
241 views

Finishing with boiled linseed oil

I'm currently working on an oak table and I'm finishing it with boiled linseed oil is this a stand alone finish? I normally use a clear varnish but fancied trying something different. Will the linseed ...
3
votes
3answers
380 views

Biscuit, dowel or simple braces for making unit top with inset lid and slim sides?

I've had 5 pieces of iroko machined for creating a top to my DIY TV lift, complete with a lid for the TV to pop up through: The dimensions are based on the pre-existing cabinet, and the lid size ...
3
votes
3answers
12k views

How to build disassemblable structure?

I'd like to build a largish (6' x 7' x 4') structure that can be assembled and disassembled on-site with only hand tools. I'm thinking about things like insert nuts, cam lock nuts, mortise/tenon ...
3
votes
2answers
3k views

How to clean a 100 year old piano

I have recently inherited a 100 year old piano that has not had any love in a long time. I have tried to clean it with vinegar and water but it persists in being VERY sticky. I don't want to harm it ...
3
votes
1answer
6k views

Bullnose vs square edge stair treads

I've been looking around the internet, and I've seen quite a few stair renovations using common boards with a square edge rather than bull nose stair treads. Is there a difference between the two ...
3
votes
2answers
460 views

How to make 1/4 inch beveled edge on unfinished walnut countertop

I had 6ftx4ft black walnut counter top delivered unfinished (for cost savings reason). Please help me find out the best tool to use to make a 1/4 inch beveled edge for this rectangular piece of walnut....
3
votes
3answers
765 views

Ramp for a tool shed

I need to build a ramp into a shed to roll carts in and out. It has to be removable. Door opening is 50", rise is 10" and I have 48" of space in front of the shed. Max weight on the ramp at one time ...
3
votes
2answers
191 views

Building custom cigar box - is there a MAYA or 3DSM to wooden cutout service

I am looking to build a custom cigar box, and was wondering if I were to design it in MAYA or 3D Studio Max and the figure out all the different pieces I would need. Is there a metal, plastic, or ...
3
votes
1answer
5k views

How to connect two bed legs to make a bunk bed from two regular beds?

I am planning to make a bunk bed from two regular kids' beds and looking for ideas how to connect two bed legs so that the result would be aesthetically pleasing, as well as constructionally sound. ...
3
votes
1answer
72 views

Are conduits run along floors code permitted?

I'm running 240v outlets in my garage for several woodworking machines. To keep the conduits out of sight, I'd like to run them 4-6" off the floor along the bottom of the wall. Is this allowable ...
3
votes
1answer
777 views

Does my sandbox need a bottom if it will be over clay soil?

I live in the south and have pretty heavy clay soil. I'm planning on building a simple 4' by 4' sandbox for my kids. Once I remove the sod, can I just dump in a bunch of sand, or should I staple ...
3
votes
1answer
6k views

Are pocket screws strong enough for a bed frame?

I've built a loft bed for my 4 year old following the plans posted here: http://ana-white.com/2012/07/plans/camp-loft-bed-stair-junior-height I modified the plans slightly to use a ladder instead of ...
3
votes
1answer
176 views

How do I repair splits in a wood cabinet going with the grain?

How do I fix 2 narrow splits on a wooden clock cabinet? The splits are following the grain pattern. I want to fill them in and not notice them. Should I use a colored wax stick?
3
votes
1answer
9k views

How to drill a grommet hole through a desk? [duplicate]

I have a wall desk that hides away 2 power outlet on the wall. How do I drill a grommet hole that is wide enough to run cables through and cover it with plastic wire cover. What sort of tool do I ...
3
votes
1answer
121 views

How can I temporarily secure a wooden countertop to its base with limited cabinet access?

The title is a bit of a doozy, sorry. I'm repurposing an old counter I bought off Kijiji to turn it into a kitchen island / kegerator. The old cuonter top was some terrible, cheap, laminate-esque ...
3
votes
2answers
1k views

How to calculate dead/live load on this 2x4 structure

Here is my general plan. These will be built in the corner of a room and each bay will have a lag into the wall's 2x4 including one in the adjacent wall. The idea is to build these 2x4 frames and ...
3
votes
1answer
790 views

When to use a spline vrs a biscuit joiner?

I know how to do either, but want to know if one is better than the other for particular joints (if so, what cases). Or is it just a trade off between time / labor (spline) and ease / cost (biscuit ...
3
votes
3answers
735 views

What are my options for framing a thicker than average piece of artwork?

I have a piece of signed TV artwork that is mounted in cardboard frame aprox 1cm deep, that i want to hang on the wall. I've had a look round and most of the frames i've found aren't deep enough to ...
2
votes
3answers
5k views

how to drill a 2 1/2 in by 5 in long hole in wood?

I am wanting to make my own tiki torches, by drilling a hole 2 1/2 in wide by 5 inches deep in the end of a small log. I can't seem to find spade bits any bigger then 1 1/2 in, and nothing long ...
2
votes
5answers
10k views

How do I sharpen wood lathe tools?

I've had a lathe for about a year now (I have the JET 1442 with variable speed) and love it but noticed that I really suck at keeping a nice sharp edge on my tools. I have a small bench grinder I use ...