Questions tagged [woodworking]

Questions related to making things out of wood.

Filter by
Sorted by
Tagged with
0
votes
0answers
27 views

How to drill into a 5/8” edge?

I’m trying to follow these following day bed plans: https://www.ana-white.com/woodworking-projects/simple-daybed and I’m trying to attach the bed frame to the posts. It looks to call for screwing the ...
0
votes
0answers
57 views

Finishing garage for year-round woodworking workshop

In Toronto, ON and I'm finishing my attached double garage (20x20) in hopes of setting up a woodworking shop. It's not currently heated or cooled but I plan on using it year-round so heating is ...
0
votes
0answers
38 views

Polyurethane shows oil when touched?

I finished a set of pine 2x12's that will be shelves for a bookshelf using the following process. Sanded the boards with 80, 120, and 220 grit Stained the boards with Minwax oil-based Early American ...
0
votes
2answers
99 views

Dismantling an old piano

I'm trying to dismantle an old piano, and I would like to do it without damaging the individual parts or pieces of timber (for sentimental reasons - may use it in other projects). I've screwed out ...
0
votes
1answer
32 views

Replace rear bearing of Dewalt DWS520 Type 1 track saw

I would like to replace the rear bearing from a Dewalt DWS520 Type 1. I am not getting the armature removed. I did remove the yellow cover, but the armature is still stuck in the body of the saw. Can ...
0
votes
0answers
48 views

DIY Pool Lift designs & successes?

My dad suddenly has serious mobility issues keeping him from his beloved pool. I’m visiting this week and trying to see if there’s some diy pool lift of any design I can build from stuff at Harbor ...
0
votes
0answers
48 views

Help identify wood & stain for tongue & groove + beam cabin ceiling popular in Poconos (and possibly other woodsy areas)

I have cathedral popcorn ceilings in my house and am looking to reproduce a tongue & groove + beam type ceiling that is/was very popular in a lot of chalet type houses in the Pocono mountains (and ...
0
votes
1answer
30 views

Silicone use to bond wood boards at high temperature? [closed]

I'm in a composites manufacturing class, and I'm looking to make a one-off carbon fiber mountain biking handlebar from prepreg. As I don't want to invest in the metal needed to make a proper mold, ...
0
votes
1answer
47 views

How do I go about leveling out streak marks in my wood stain?

I used knotty alder wood and sanded to 320 with a random orbital sander. Knotty Alder Min-Wax Pre-Stain Conditioner Min-Wax Oil-Based Stain Applied with t-shirt rag I see streak marks in my staining ...
0
votes
0answers
24 views

How can I cut and glue brittle foam panels onto my van without breaking it?

I brought some very thin (1mm) wood panel strips to glue into my van (over the insulation to make it look nicer). However the wood is very brittle and thin, I have to attach it to some curved ...
0
votes
1answer
59 views

Can 1" thick planks take (vertical) shear loads of 200kg through bolts without splitting?

I am extending an aluminium ladder by bolting the lower ends to 3" wide, 1" thick struts. I am concerned that the (6mm) bolts may split the wood when loaded.
0
votes
0answers
42 views

about strengthening wood plank end grain from splitting

I am thinking about strengthening wood plank end grain by gluing another piece of same type of wood, with perpendicular grain directions. See the picture below: The longer plank will be about 1 inch ...
0
votes
0answers
35 views

How to Determine the Correct Size of Beam to Support Suspended Planter

I am trying to plan a project that will look like this. The bottom piece will be secured down and won't be able to move. I'm trying to figure out what size of beam I will need to connect the bottom ...
0
votes
2answers
429 views

Gluing Table Aprons to Plywood Table Top

I'm building a tall, large standing desk and removable legs are required for this to fit through doors. I'm using pocket screws to attach the aprons (hardwood maple) the table top (birch veneer ...
0
votes
0answers
663 views

Burning smell on new miter saw - pre-installed blade

I bought a new Dewalt miter saw and every time I use it, there is a burning smell. I saw this question about a similar issue, but I don't think my problem is the speed at which I'm cutting or the ...
0
votes
3answers
304 views

Best way to mount a wooden tabletop to a flat surface

I am in the process of building a new desk for myself. I have already built two drawers that will function as the legs of the desk, and I have the tabletop itself. Now, what would be the best way to ...
0
votes
1answer
1k views

How can I get rid of bumps and other damage?

I have these two tables that are very hard to replace, so I want to fix them instead. The problem is that they have scratches, bumps and I don't even know what else. What is the best way to fix them, ...
0
votes
0answers
95 views

What finish type is most often used for furniture drawer interiors?

I recently completed building a cabinet drawer to convert a free standing vanity into a dresser. I'm aware that drawer interiors are often left unfinished, but it's quite humid where I live and I ...
0
votes
0answers
446 views

Fixing glass onto a porch roof

Ive made myself a fairly large porch area on the front and side of my house. Im in the UK but Ive always liked American style porches, so ive ended up with a porch that is 7.5m along the front and ...
0
votes
0answers
679 views

Can turnbuckles hold a frame in tension?

I'm building a king-sized bunk bed using a loft/joist design. Basically, I've got (see below): slats nailed into joists joists joined to headers with blind tenons headers joined to posts with blind ...
-1
votes
2answers
65 views

Woodworking routers [closed]

I've just purchased an elu 1/4" router. Will I be able to get an half inch router adapter to fit? Is the router I've purchased any good and can I make a table for it?
-1
votes
2answers
145 views

Need to fill in chair gaps

I have painted two slatted wood chairs white, (slats run horizontally). The slats are 1.5" wide and the gaps between are 1/2". I tried painting black stripes to imitate piano keys along the side edges....
-2
votes
3answers
2k views

Where can I find a knife blade with no handle? [closed]

I would like to make a nice wooden handle for a knife, but I do not have the means of cutting out a blade shape from scratch. Where are some places I could look, or some search terms for a knife ...