Questions tagged [woodworking]

Questions related to making things out of wood.

Filter by
Sorted by
Tagged with
2
votes
2answers
108 views

How do I tune a Bandsaw so the blade doesn't drift?

I just bought a 9-inch Delta bandsaw and I know there are some things you have to do to get it tuned right so the blade doesn't drift etc., but I have no idea what those are. What are some tips I ...
4
votes
3answers
153 views

I have a general question about learning woodworking for a still somewhat beginner! [closed]

So I am a college student and my major is woodworking, I enjoy it but I haven't really learned the simple things, I know a lot about table saw, routers, band saw, etc, but when it comes out to simple ...
0
votes
1answer
118 views

Simplify the shop, reduce storage space… use hand powered tools [closed]

Sometime ago, I read something online, magazine, somewhere. It was the story of somebody who ran a chair making shop at Williamsburg (or similar venue). The shop owner went to use a hand held ...
3
votes
2answers
2k views

Filling holes in a timber workbench top

I got an old workbench with a top made by a pair of railway sleepers (I assume this is timber). It was very old and sticky with paint stains and not very plane at all, so I tried to use a router and a ...
1
vote
2answers
3k views

How can I place treads on these stairs around a corner?

I have built the start of these stairs. It's a difficult concept for me to build stairs around a corner so I cut part of the deck so it wasn't an abrupt 90 degrees going into the stairs (which wouldn'...
0
votes
1answer
1k views

How can I get rid of bumps and other damage?

I have these two tables that are very hard to replace, so I want to fix them instead. The problem is that they have scratches, bumps and I don't even know what else. What is the best way to fix them, ...
4
votes
2answers
1k views

Is it possible to convert a sliding drawer into a rolling drawer?

I have a beautiful, reclaimed-wood fitted wardrobe made for my house by some folks in my social circle. I love it. Except. The drawers are huge and heavy, and simply slide out wood-on-wood, 19th-...
1
vote
1answer
795 views

How to make a wooden box with a hidden lid

My aim is to make a wooden box that doesn't look openable, such that a cursory inspection and handling would not give away that it had a lid at all. A sort of diversion safe that will be placed ...
4
votes
2answers
74 views

Putting up old crown moldings

I live in an old house with crown moldings in each room. We took them down to replace a ceiling. When it's time to put them back, are there any tips that would help us so we don't damage the ...
7
votes
4answers
2k views

What wood to build a bath-tub tray?

I'm new to wood working and I want to build my wife a bathtub tray that can hold a laptop (for Hulu watching) and a glass. It doesn't need to hold anything else really. But I don't know what type of ...
0
votes
1answer
666 views

remove burn from wooden table

Hi I have a table that was burned from a hot pan and I'm wondering if anyone knows any solutions and roughly how much it would cost to remove the burn marks. I'm attaching photos you'll see the tiny ...
0
votes
1answer
416 views

Sanding between boards for smooth finish

I was following the guide at http://www.familyhandyman.com/walls/how-to-build-a-wainscoted-wall/view-all Basically, my issue is that the vertical stiles don't match up exactly with the horizontal ...
6
votes
3answers
8k views

Are there special pocket hole screws?

I purchased a pocket hole jig and it comes with screws. Are these special pocket hole screws? Is there a type of screw I should be using with pocket holes, or would any wood screw work just as well?
2
votes
3answers
5k views

how to drill a 2 1/2 in by 5 in long hole in wood?

I am wanting to make my own tiki torches, by drilling a hole 2 1/2 in wide by 5 inches deep in the end of a small log. I can't seem to find spade bits any bigger then 1 1/2 in, and nothing long ...
1
vote
2answers
171 views

Staggered block matrix

Could anyone provide advice on what would be an effective way of building something similar to the staggered block matrices as shown in the two photos below: Regarding materials, solid wood would ...
0
votes
1answer
379 views

Sagging gate: tools to adjust anchor

I'm trying to fix our wooden gate, which isn't closing well as it is sagging. I'd like to fix it by pushing the anchor inwards, but I don't know which tools to help me do that. I tried hammering it, ...
1
vote
0answers
63 views

What type of material should I use for a shelf over a washer and dryer?

building a shelf to go over my washer dryer in our laundry room. it will be 88" wide by 34" deep. I've already mounted 2x4's on the walls across back and sides. looking for advice on what material ...
2
votes
2answers
7k views

When installing a stone fireplace, do I install the wood mantle first?

I have an existing, irregular river-stone fireplace and would like to fit a solid pine slab mantle to the surface. I have considered scribing the top and bottom surfaces of the wood mantle, but I do ...
1
vote
2answers
398 views

Bracing a rain barrel platform

I'm following these plans for a rain barrel platform: http://www.diynetwork.com/how-to/outdoors/structures/how-to-build-a-rainbarrel-platform There is a step "bolster the legs" where they suggest a ...
9
votes
3answers
3k views

How do I drill a mortise and tenon joint so I can reinforce it with a dowel?

I want to make a mortise and tenon joint that will be held together with a dowel instead of glue. How can I drill the hole in the mortised stock and the tenon so that they line up accurately and ...
2
votes
3answers
4k views

Best way to create a simple and economic steam machine for steaming wood?

I want to build a simple steam machine for steaming wood to bend. To do this I must place the wood into a sealed PVC pipe and pump steam into it. The PVC pipe part is the easiest part. Producing ...
1
vote
2answers
219 views

Refinishing chop block counter top

I have bought my first house. I am DIYing my kitchen renovation. I have chop block countertops from IKEA and an undermount stainless steel kitchen sink. I know its not wise to undermount with a wood ...
0
votes
3answers
381 views

How to drill a groove to the side of a plywood board?

I want to drive a cable up a cupboard. The shelves are too long to simply put the cable behind them, so I want to create an indentation in the removable shelves. I do not own a drill press, and I do ...
1
vote
0answers
136 views

Dust after staining and poly advice

Two questions: How should I prepare for applying poly to new stain? I am refinishing a wood veneer table top. I stripped it back to the wood, and I have stained it with Old Masters Wiping Stain, ...
2
votes
1answer
4k views

What kind of joints are best used for a loft bed?

I'm specifically referring to the design seen here. It's quite hard to view how the corners are joined together. I found a couple of other designs that are similar, it kind of looks like a butt joint ...
2
votes
2answers
2k views

Marbles in marble dispenser get stuck trying to fit through hole

I've been working on a marble dispenser for the little ones. The box in the center is meant to be pushed. When pushed, it aligns three slots and allows the marbles to drop. (See figures). The problem ...
3
votes
1answer
72 views

Are conduits run along floors code permitted?

I'm running 240v outlets in my garage for several woodworking machines. To keep the conduits out of sight, I'd like to run them 4-6" off the floor along the bottom of the wall. Is this allowable ...
8
votes
2answers
4k views

How can I repeatedly cut the same pattern using a router?

I'm involved with a project where I need to use a router (or some other tool?) to carve a specific-sized square in the top of a desk. This square will not go all the way through the desk; rather, it ...
0
votes
4answers
7k views

Cutting depth of a Jig Saw

I'm looking at getting a hand held Jig Saw like the Bosch 150 CE because it has the longest cutting depth 15cm(6"). I'm wanting to do some end notching on 150mm x 150mm lumber. For example: What I'd ...
5
votes
1answer
1k views

What are these metal fittings called?

On the amazing The Fletcher Capstan Table video, I can see some very useful metal fittings, but I can't for the life of me find them anywhere. This is probably because I don't know what they're called....
0
votes
1answer
121 views

Frugal thick table top ideas

I'm trying to build a TV stand which will have a top on it about 80" x 20" x 3/4". It can be thicker than 3/4" but I'd like it to be at least that. Assuming I build a supportive frame, what's the ...
1
vote
4answers
9k views

How to fix bar stools that are too short

I bought bar stool chairs but they are too short for the bar area. Is there a way to make the chair stools longer in length?
10
votes
1answer
1k views

What type of woodworking clamp is this?

The pair of orange clamps are held onto a special mortising jig via threaded rod, the red inset image is a variation on the design but what are they called and where can you get them from?
2
votes
1answer
2k views

What termite treatment is needed for reclaimed wood being used indoors

I've saved a handful of planks from my old back fence after replacing it, and plan to turn them into indoor furniture (coffee table, etc.). After some experimentation I've decided I want to seal and ...
1
vote
1answer
882 views

When is a table top too heavy for just four legs?

I'm making a coffee table out of an old bowling alley lane and it's 4'x18". I wish I knew exactly what it weighed but it is heavy. It's too heavy for me to move without dragging it - although I'm ...
0
votes
4answers
15k views

how to carry 20ft lumbers to home

I need to carry one 20 ft lumber from HomeDepot to my home. I don't have a truck but have a minivan (Odyssey). The minivan does not have a roof rack though. A friend of mine suggested that I could ...
2
votes
3answers
335 views

Can I use paint stripper in my basement workshop?

I am looking to refinish a pool table that I purchased. Since it is winter and too cold to do it in my garage, I would like to do it in my basement workshop but I'm worried about the fumes. I have ...
1
vote
2answers
551 views

What thickness, size, and quality plywood is required for an aviary floor?

12'L x 5'D x8'H size aviary needs what thickness plywood to hold human weight. Aviary floor is slightly elevated from the ground. Also, please specify how many floor joists it needs to hold the weight ...
5
votes
4answers
3k views

Easiest way to cut, shave, or chisel bottom 8" of posts to fit footings

I got some 6x6's and deck post brackets that are similar to the picture below, except they're 8" high: Come to find out, the 6x6 is slightly too large to fit inside this bracket. Now I see how this ...
1
vote
2answers
3k views

How do I make bevel cuts to form a ring with 2x4's?

I want to make a round wishing well. I have 12 2x4's @1'h. What degree of bevel do I need so they fit into a tight circle?
2
votes
0answers
496 views

Repurposing Old Subfloor Planks [closed]

I am pulling up my old subfloor (my house was built in 1928) in the attic which consists of tongue and groove wooden planks. Any ideas for repurposing them as a wood working project?
3
votes
5answers
3k views

How do I cut lengths of wooden beading lengthwise?

I wish to replace some missing beading in a stairwell. I've only a limited amount of equipment and experience, but I figured I could get a mitre saw and some matching wooden edging and the right stain,...
1
vote
2answers
11k views

How can I round the edges of a piece of wood?

I need a piece of wood to place above a window, to which I'm going to attach a curtain rail. I'd like it to match an existing piece of wood above another window, which has quarter-round edges all ...
1
vote
1answer
158 views

Can I use a universal 22" wood saw for cutting studwork?

I'm a newbie and do not have much experience with sawing, or working with wood. I need to buy and cut into various lengths some wood for studwork (at varying thickness levels). What kind of saw ...
-1
votes
2answers
65 views

Woodworking routers [closed]

I've just purchased an elu 1/4" router. Will I be able to get an half inch router adapter to fit? Is the router I've purchased any good and can I make a table for it?
0
votes
1answer
32 views

How do I support shelving

What is the recommended distance between brackets when supporting a particleboard shelf 11 3/4 inches deep by 3/4 inches thick to support books?
1
vote
1answer
3k views

Strength of rabbet joint for bed frame

I am about to build a custom raised bed frame. I have found the simple construction shown in the picture below, which seems suitable for my use and abilities. From what I can look up, the joints ...
1
vote
1answer
2k views

How to cut a 1 inch thick 12x48 plank in half (thickness)?

I was wondering how you would go about doing this. I have a 48x12x1 Bamboo blank. I'd like to cut the thickness in half so I have 2 planks. Perfect 0.5 width (with blade) does not matter as long as it'...
2
votes
3answers
134 views

Best tools for woodwork project

I'm starting a project where I need to cut a 114mm diameter, 33mm deep hole into a piece of wood. My plan is to keep the circular piece, then to sand it. My question is, what would be the best piece ...
1
vote
1answer
168 views

Is softwood appropriate for furniture squares on a hardwood cabinet?

I'm building some cabinets out of 3/4" plywood, and I'd like to use 2x2" (nominal) stock as furniture squares. These squares will be on the interior only; it's not visually necessary for the interior ...