A message from our CEO about the future of Stack Overflow and Stack Exchange. Read now.

Questions tagged [woodworking]

Questions related to making things out of wood.

31 questions with no upvoted or accepted answers
Filter by
Sorted by
Tagged with
2
votes
0answers
70 views

Do hinge screws become more tight-fitting over time once installed?

I've noted newly installed hinge screws can be replaced more easily if replacement is within days after fitting. If left for weeks or more, they become considerably harder to remove due to friction. ...
2
votes
2answers
36 views

Paint/stain used for wooden planter?

I built a large planter using untreated wood. Before pouring the potting soil into the planter, I have to paint the the planter with something that will protect it from the soil, the humidity, etc. I ...
1
vote
2answers
37 views

Ventilation when using water-based stain & finish

With oil-based stains and finishes, reading SDS safety sheets makes it clear that safely using the products requires nitrile gloves, serious ventilation, and a respirator that can handle VOCs. With ...
1
vote
1answer
73 views

How do I go about leveling out streak marks in my wood stain?

I used knotty alder wood and sanded to 320 with a random orbital sander. Knotty Alder Min-Wax Pre-Stain Conditioner Min-Wax Oil-Based Stain Applied with t-shirt rag I see streak marks in my staining ...
1
vote
0answers
14 views

Staining + sealing cedar for outdoors

I've made an outdoor cabinet out of cedar. I like the natural look, but I used various other wood species like white oak as "moulding" and am thinking I would like a uniform look. I would like the ...
1
vote
0answers
194 views

How to stop redwood decks from creaking

My home was built brand new in 2016. I have a front porch and two back decks made of redwood and they all creak so badly, it's almost embarrassing... Anyone have any tips on how to quite them down?
1
vote
1answer
91 views

What is the proper way to sand live edge piece of wood in preparation for a polyurethane finish?

I have debarked a live edge walnut slab. Since the edge is rough and not flat, how would one properly sand that live edge without killing all of the subtle contours of that live edge. All of the ...
1
vote
1answer
4k views

Can you create wood conditioner from DIY wood sealant?

I'm working on staining an old bookshelf, and I've worked on creating my own DIY wood stain and sealant (save money + no VOCs + Feels good). I created my own wood stain already by using steel wool and ...
1
vote
0answers
63 views

What type of material should I use for a shelf over a washer and dryer?

building a shelf to go over my washer dryer in our laundry room. it will be 88" wide by 34" deep. I've already mounted 2x4's on the walls across back and sides. looking for advice on what material ...
1
vote
0answers
136 views

Dust after staining and poly advice

Two questions: How should I prepare for applying poly to new stain? I am refinishing a wood veneer table top. I stripped it back to the wood, and I have stained it with Old Masters Wiping Stain, ...
1
vote
0answers
5k views

Load bearing capacity of 2x6's for diy lifting cage

I want to build a custom power rack to safely perform heavy barbell exercises in my home. Commercial racks are too tall for my basement. Others have done this before: http://www.home-gym-bodybuilding....
1
vote
0answers
1k views

How do I build a white board stand?

I'm looking to create a wood stand for a white board. I have never built anything before and am looking for both insight on what to do and possible schematic ideas. I took basic construction classes ...
0
votes
1answer
60 views

DeWalt 743 flipover saw

I have a DeWalt 743 flipover saw, the blade stopped turning for no reason. It was working fine yesterday morning, but when I came back from a break, the blade refused to turn. I can hear the noise, ...
0
votes
0answers
40 views

Best half-decade for a used well-maintained Unisaw?

I'm in the market for a used Unisaw. I found that well-maintained Unisaws on craigslist vary from about $800 for an 1980s model to about $1100 for a 2010s model. So there's actually very little ...
0
votes
1answer
30 views

how to strongly secure a wire over a couch frame to stretch seat spring webbing

I have a wire piping that used to be secure around the frame perimeter of my couch base so that a flexolator webbing with springs would be stretched taut and clip onto it. However, this piping has ...
0
votes
0answers
28 views

Wood rot treatment product

A few years ago I removed all the soft wood on a windowsill & rebuilt the sill with new wood and filler. I've just found out that it's rotten again. 1) Should I have treated the old wood prior to ...
0
votes
0answers
28 views

How to drill into a 5/8” edge?

I’m trying to follow these following day bed plans: https://www.ana-white.com/woodworking-projects/simple-daybed and I’m trying to attach the bed frame to the posts. It looks to call for screwing the ...
0
votes
0answers
62 views

Finishing garage for year-round woodworking workshop

In Toronto, ON and I'm finishing my attached double garage (20x20) in hopes of setting up a woodworking shop. It's not currently heated or cooled but I plan on using it year-round so heating is ...
0
votes
0answers
56 views

Polyurethane shows oil when touched?

I finished a set of pine 2x12's that will be shelves for a bookshelf using the following process. Sanded the boards with 80, 120, and 220 grit Stained the boards with Minwax oil-based Early American ...
0
votes
2answers
121 views

Dismantling an old piano

I'm trying to dismantle an old piano, and I would like to do it without damaging the individual parts or pieces of timber (for sentimental reasons - may use it in other projects). I've screwed out ...
0
votes
1answer
45 views

Replace rear bearing of Dewalt DWS520 Type 1 track saw

I would like to replace the rear bearing from a Dewalt DWS520 Type 1. I am not getting the armature removed. I did remove the yellow cover, but the armature is still stuck in the body of the saw. Can ...
0
votes
0answers
64 views

DIY Pool Lift designs & successes?

My dad suddenly has serious mobility issues keeping him from his beloved pool. I’m visiting this week and trying to see if there’s some diy pool lift of any design I can build from stuff at Harbor ...
0
votes
0answers
127 views

Help identify wood & stain for tongue & groove + beam cabin ceiling popular in Poconos (and possibly other woodsy areas)

I have cathedral popcorn ceilings in my house and am looking to reproduce a tongue & groove + beam type ceiling that is/was very popular in a lot of chalet type houses in the Pocono mountains (and ...
0
votes
0answers
24 views

How can I cut and glue brittle foam panels onto my van without breaking it?

I brought some very thin (1mm) wood panel strips to glue into my van (over the insulation to make it look nicer). However the wood is very brittle and thin, I have to attach it to some curved ...
0
votes
0answers
57 views

about strengthening wood plank end grain from splitting

I am thinking about strengthening wood plank end grain by gluing another piece of same type of wood, with perpendicular grain directions. See the picture below: The longer plank will be about 1 inch ...
0
votes
0answers
35 views

How to Determine the Correct Size of Beam to Support Suspended Planter

I am trying to plan a project that will look like this. The bottom piece will be secured down and won't be able to move. I'm trying to figure out what size of beam I will need to connect the bottom ...
0
votes
0answers
776 views

Burning smell on new miter saw - pre-installed blade

I bought a new Dewalt miter saw and every time I use it, there is a burning smell. I saw this question about a similar issue, but I don't think my problem is the speed at which I'm cutting or the ...
0
votes
0answers
97 views

What finish type is most often used for furniture drawer interiors?

I recently completed building a cabinet drawer to convert a free standing vanity into a dresser. I'm aware that drawer interiors are often left unfinished, but it's quite humid where I live and I ...
0
votes
0answers
455 views

Fixing glass onto a porch roof

Ive made myself a fairly large porch area on the front and side of my house. Im in the UK but Ive always liked American style porches, so ive ended up with a porch that is 7.5m along the front and ...
0
votes
0answers
694 views

Can turnbuckles hold a frame in tension?

I'm building a king-sized bunk bed using a loft/joist design. Basically, I've got (see below): slats nailed into joists joists joined to headers with blind tenons headers joined to posts with blind ...
-1
votes
2answers
148 views

Need to fill in chair gaps

I have painted two slatted wood chairs white, (slats run horizontally). The slats are 1.5" wide and the gaps between are 1/2". I tried painting black stripes to imitate piano keys along the side edges....