Questions tagged [washing-machine]

For questions about clothes washing machines (also referred to as clothes washer or laundry machine).

Filter by
Sorted by
Tagged with
0
votes
1answer
20 views

Bosch washing machine - replaced motor brushes, motor now “fizzes”

The drum in my Bosch Serie 8 washing machine stopped turning recently and after a bit of internet research it sounded like the motor brushes had worn down. I bought new "official" (allegedly)...
1
vote
1answer
12 views

Washing Machine super loud noise at the start

I currently have front loader washing machine(samsung WF-JT254) and suddenly it started to start making super loud noise when I use it. I tried to record the sound I am getting when I record it on my ...
0
votes
1answer
39 views

The waste hose on washing machine sits on floor/low

We have a smell that I'm sure comes through from the standpipe when washing machine is in use. The standpipe doesn't seem to smell after use though(like this evening, last wash was earlier in day). ...
0
votes
0answers
17 views

Holes in washer basket

I recently removed the agitator in my Whirlpool (model LSQ8500JQ1) washer to replace the "dogs". The bottom of the basket looked like this: Something is missing in the upper hole, what is ...
6
votes
8answers
38k views

Can I replace one of the units in a stackable washer/dryer combo?

We have two individual units and the washer needs to be replaced but not the dryer. One appliance store said I have to buy both washer and dryer/two new units. If the dimensions are the same or as ...
2
votes
3answers
5k views

New Samsung Washer Smells

I am concerned because our new Samsung washing machine (front loading, stackable, stacked on the bottom) absolutely REEKS of chemicals; the closest I can think of is paint thinner. I expected a "new ...
-1
votes
1answer
668 views

How do I remove this Electrolux drum paddle?

I have a Simpson SWF-1076 (now owned by Electrolux). The paddles look exactly like this Electrolux part no. 50249701009, though I can't be sure it's the same underneath. How do I remove this design ...
1
vote
0answers
1k views

New Samsung Steam Dryer condensation in display

I just got my new Samsung electric washer with Steam Cycle, This One, After using it I noticed it started to accumulate water vapor in the display in a way that makes it hard to read the numbers on it,...
0
votes
0answers
42 views

Kenmore washing machine stuck at sense cycle with drum bashing against side walls

For a while now the spin cycle has seemingly got ever so more loud. I removed the surround to the tub which looks to be for fabric softener to drip into it and then into the double wall of the bowl, ...
1
vote
1answer
78 views

What's the correct laundry drain stack order?

I am installing a new washer box. (see picture for reference) My plan was to switch out the Wye from the sink so the top was 2" and put the p-trap and Wye from the washer just above that in the ...
1
vote
2answers
11k views

Is it normal to have water left in front loading washing machine after the cycle?

I just moved into a new apt, hooked up the washer and decided to do a test run. But I did not realize that the door was not shut tight although I did hear the locking click right before the cycle ...
1
vote
3answers
3k views

How to stack a portable countertop / tabletop Dishwasher on top of a front load washing machine?

I have limited space because all the cabinets were already setup long back. A Bosch front load washing machine (60cm (d) x 60cm (b) x 85 cm (h) is placed in this space. There is a gap of 60.5 cm from ...
0
votes
1answer
1k views

Why won't the brake release the drum (tub) in my Simpson 950 Eziset?

When a full cycle is first started there is no "click" and the tub no longer turns as the machine does its "little bit of water here and a little bit there" routine before commencing the wash cycle. ...
2
votes
1answer
227 views

Which adapter am I missing for my washing mashine?

I got a new washing mashine from a friend. As we couldnt get of the tube, i had to buy a new one. Now it seems i am missing an Adapter. Which Adapter do i need? (I hope the questions is ok to ask here....
0
votes
1answer
1k views

Whirlpool Duet front loader door won't unlock

I have a Whirlpool Duet front loading washer. It finished its cycle, all the lights are off, no error codes, but the door won't unlock. I unplugged it and let it sit. Then I found a manual online ...
0
votes
2answers
15k views

How can I connect a portable dishwasher to laundry hookups?

I just moved into new duplex that has a decent sized laundry room. During my move I brought my portable compact dishwasher (very similar to this one). I don't have counter-top space to position the ...
1
vote
0answers
49 views

Washing machine shaking

I've got a Maytag washing machine, model number mvwc500vw1, that is shaking pretty bad in the spin cycle. I've made sure the feet are level, replaced the suspension springs and both sets of snubber ...
-1
votes
1answer
42 views

What is the cubic foot capacity of my Maytag washing machine?

My washing machine is over 21 years old. I am going to buy a new one with a larger capacity but I don't know the cubic ft capacity of mine. It is a Maytag MAV6057AWW.
0
votes
2answers
41 views

Rattling noise in Bosch WFK2401UC Compact Washer on spin

I have a compact Bosch stackable washer and dryer model #WFK2401UC. When it goes into the spin cycle, mainly when the revolutions are slower, it makes a rattling noise like there is spare change ...
0
votes
1answer
52 views

Is it safe to extend the drain hose on my LG washer?

I just purchased an LG washer, model WM3900HWA. The drain hose is not long enough to reach the stand pipe. I have seen this post where the answer is to simply buy a longer drain hose. However, the ...
1
vote
2answers
75 views

Replace GFCI outlet or the brand new washing machine?

I just bought a brand new washing machine and its tripping the (15 amp) GFCI circuit breaker. The main breaker in the fuse panel is 20 amps and is not tripping. The GFCI trips every time the washer ...
6
votes
8answers
180k views

Why does my washing machine leak only during the spin cycle?

For the second time in a month, I found that my washing machine had flooded the kitchen floor (and part of the basement via the hole for the water line to the fridge). The first time, I only ...
-1
votes
1answer
183 views

How do I stop washer machine back flow when it it is on spin?

When I do a load of wash it all goes well until it drains. When it drains, it back flows. I did every thing I could to snake and flush the drain. I even poured hot water down there and it still does ...
1
vote
1answer
78 views

Hotpoint 9 cycle washer won't finish draining after agitate cycle

My washer fills, then agitates, then drains out, but gets stuck draining. I can move the knob to get the machine to move to the next step in the cycle, but when it needs to drain again after the rinse,...
2
votes
3answers
936 views

Why do clothes washed with my new Samsung top load washer have an odor? [closed]

New top load washer that we purchased about 5 months ago is putting off a bad smell to washed clothing. I wouldn’t think the washer is dirty already. Any help would be great.
2
votes
1answer
92 views

Could this trap be siphoning?

I've attached a picture of the trap for my washer. The closet that this is in smells like septic tank gas so I assume it is leaking out of the standpipe. I haven't seen this type of trap before and I'...
-4
votes
1answer
47 views

My washer is saying F51 on maytag bravo quite series 300

I need links diy video to fix it. I need a manual version also and images
0
votes
2answers
3k views

Error code UE on Kenmore Elite Front Load Model 79641162410

Have a Kenmore Elite Front Load model 79641162410. Throws error code UE every wash cycle. Wash cycles take > 6 hours to complete with multiple manual re-balances required. My first examination ...
-1
votes
2answers
1k views

worn seal between agitator spindle and drive shaft on a GE washer

10 year old washer is operating fine except for the main tub seal which is known to be leaking. Upon disassembly, the seal/bushing around the agitator shaft appears badly worn too. Not sure if it ...
-1
votes
1answer
169 views

Hooking a fridge/freezer and washing machine to one cold water supply

Is it possible to connect a fridge/freezer and a washing machine to a single cold water supply? I need to know what sort of adapter I would need for the water supply to feed both appliances.
1
vote
2answers
589 views

Whirlpool washer stopped mid cycle

I have a Whirlpool washer (wtw5000dw0) that stopped in the middle of a wash cycle. I think it stopped before the drain cycle so the washer is currently full of water. When I try pressing the button to ...
-1
votes
2answers
404 views

Water remain in my Kenmore washer

After a wash cycle, I noticed that water still remains in the machine. You amount is not sufficient to be seen by looking in the tub but if you shake the tub or the machine you can hear it splashing. ...
1
vote
0answers
25 views

Washing-Dryer machine installation (rotate)

I would like to know if it is possible to setup a washing machine (or a washing machine with integrated dryer) such that the installation pipes are on the side. NOTE: I don't know anything about ...
1
vote
1answer
70 views

Strange black mark against washing machine wiring harness

My washing machine stopped working and I can see that the front panel circuit board has scorch mark on it. I'm thinking about getting a second hand circuit board to replace it but wanted to check some ...
2
votes
4answers
176 views

Washing machine drain hose very high

I recently moved into this place and this is the setup of the washing machine and its drain hose. The clothes come out of the wash still pretty wet, particularly on the bottom. My girl thinks the ...
-1
votes
1answer
300 views

Whirlpool washing machine has a small leak from bottom

I have replaced the seal below the pump and the drain hose and I have a leak only on normal when it's operating in spin cycle. It's a small leak on the front bottom counter weight. Can anyone help? I ...
10
votes
3answers
2k views

Removing clip that's securing rubber hose in washing machine

Our washing machine developed a massive leak that caused a flood. We flipped the machine, and traced it back to two holes in a black rubber hose that appears to be attached to the output of the pump. ...
1
vote
2answers
65 views

Washing machine overflow

I live in a home built in the late 60s. The old set up for the washer was draining into a utility sink (1 1/2 trap that connects to a 2in main) I wanted to move the washing machine to the other side ...
0
votes
1answer
70 views

What is causing washing-machine not to complete

Machine goes through all the cycles but on the last cycle it does not complete the cycle water some remains in the tub.
-1
votes
2answers
4k views

Washer stops half way through wash cycle

Our Whirlpool Ultimate Care II stopped working in the middle of the wash cycle tonight. No noise, just stopped. Restarted it and it did it again, and again, and again. Any ideas on what might be ...
0
votes
1answer
104 views

Find a Water Pump for Clothes Washer

I'm trying to run a front load He Samsung washer (13 gallons water per wash) with water from a 18gal tub sitting on top of it. This is not enough pressure to get the water to work. It needs a minimum ...
1
vote
3answers
7k views

How can I level a part of a concrete floor in preparation for installing a washing machine?

Whoever installed the existing washing machine in the basement was unable to extend one of the legs long enough to adjust for the slope in the concrete floor. So they took a piece of wood and stuck ...
2
votes
1answer
106 views

Will newer Siemens AFCI/GFCI circuit breakers handle washing machine loads better than older versions?

We have new LG 4500 washing machine in new townhouse w Siemens breaker panel. LG Washer keeps tripping the breakers (15A Siemens Type QAF2 - CAFCI - w ARC Fault). I hooked up the washer to a 15A Surge ...
1
vote
0answers
2k views

Brand new LG washing machine tripping AFCI combination breaker in new house

Hey this is less of a question than a problem I was able to trouble shoot, but I have a feeling other people might be going through the same situation and might have come up with other solutions to ...
0
votes
3answers
9k views

How can I repair a pinhole leak in a washing machine drain hose?

I've just reconnected my washing machine and tested it, and there's a tiny hole in the out-flow pipe. The hole is in red circle in the images below ... in the fairly-rigid, ribbed plastic, rather than ...
1
vote
4answers
15k views

Washing Machine Fills with water, then drains

We have a front loading GE washing machine model GFWN1000. Recently, when running any of the wash cycles, it will fill with water like normal and then go ahead and drain without doing any washing. I ...
7
votes
11answers
59k views

How can I repair the start button on my LG washing machine that is hard to press?

The start button on my LG washine machine WD14700RD is very hard to press, and getting worse. I need to lean on it with my whole body weight in order for the program to start. All the other buttons ...
3
votes
2answers
3k views

What causes a washer to spin slowly but is resolved by manually moving the basket around?

Washer Details Kenmore Whirlpool Series 80 Model #11024862300 Direct Drive Top Load Washer Manual with diagrams Video of the problem Washing machine spin problem on direct drive Kenmore Whirlpool ...
0
votes
0answers
23 views

Washing machine stops in not-cold program

We have an old top loader washing machine (model: Privileg maker: Quelle). For a few months we sometimes encounter the problem that the machine stops during the program, exiting with the error code 0 ...
-1
votes
2answers
61 views

Plumbing a washing machine drain in a new location with complications

I want to move the location for the washer hookup in an older house. At the previous location it was a one and a half inch drain and it worked 'okay'.... I am looking at one and a half inch at the new ...

1
2 3 4 5
10