Questions tagged [walls]

Vertical structures which usually enclose, divide, define, or protect an area.

Filter by
Sorted by
Tagged with
9
votes
2answers
26k views

How should I fill a hole in an exterior wall?

I noticed a good sized hole in an exterior wall that allows wires and things to go from my AC unit into my basement. The problem is that the hole is a good deal larger than it needs to be and there ...
6
votes
1answer
2k views

What should I do to level an uneven floor with a potential load bearing wall above?

I'm trying to level the first floor in my 90 year old house. The floor joists are held up by a wooden beam composed of 5 2x8s, which is held up by two steel columns. In the middle of the wooden beam ...
1
vote
1answer
846 views

How can I block off a doorway with studwork on a brick wall?

I'm blocking up a doorway in a brick wall. I've decided to block it up using a stud wall as that should be a bit easier than bricking it up. I know that the bricks are 11cm depth plus approx 2cm ...
10
votes
1answer
1k views

What is this rectangular device on my apartment wall?

So on this particular wall in my apartment I have two fire detectors (one that's plugged in but seems to have some sort of internal battery and one that takes 9V batteries), a thermostat and... this: ...
1
vote
3answers
3k views

Will plaster on basement walls and ceiling provide insulation?

My basement's insides are completely unfinished. It has bare brick walls and bare concrete beams-vaults as the ceiling. I though of coating the walls and the ceiling with 2 inch thick plaster with the ...
0
votes
1answer
234 views

How can I reproduce this painting effect?

I really like this photowallpaper, but it's quite impossible to import it: I think - based on my basic but quite good paining skills - I can reproduce it with painting. But.. which type of paint is ...
1
vote
3answers
4k views

What options are available for insulating interior walls myself with minimal damage to the wall?

United State | California I'd like to insulate the interior walls in my house using a minimally invasive method. My understanding that is that "blown-in insulation" requires specialized equipment ...
2
votes
1answer
5k views

How do I replace the exterior wall without damaging the siding?

I have three exterior walls that need all the studs and the top plate replaced. I am a novice carpenter and I try to learn everything through research and study first. The walls would need realigned ...
1
vote
0answers
3k views

Do I need to add a protective layer to insulation for wall heater?

I am going to install a 4000 watt wall heater to an add on. It is the kind of wall heater that is seated in the wall. i also plan to install insulation in between my wall studs. there will be ...
3
votes
2answers
3k views

How to repair a large hole in OSB?

I know that it's just the garage but I'd like to repair this approximately 5 inch hole in an interior OSB partition wall. How should I proceed?
3
votes
2answers
1k views

What should I do to make good on some lightly water damaged plaster?

When we moved in to our house (an early 1970s build in the UK) we noticed some damage to the plaster above a window; the surface was uneven and some was loose. It appeared dry so the surveyors and ...
3
votes
3answers
5k views

Should I mount brackets to the wall or the shelves first?

I've planning to mount some shelves using these IKEA Lerberg brackets Should I mount them to the wall or the shelf first?
3
votes
1answer
1k views

What considerations do I need to make when mounting heavy objects on plaster walls?

I have just moved into an old apartment in Brooklyn. The landlord has warned us that all the walls are plaster with wood framing. I have not dealt with this type of wall before. I would like to hang ...
4
votes
2answers
11k views

What's behind the hard plaster walls?

Most of the walls in the old part of my house are plaster. Hard, nasty, amazingly solid plaster. While this is nice in some areas, there's others that it's rather annoying -- such as on the stairs (...
2
votes
0answers
4k views

What could be causing thumping in the wall when the bathroom shower, toilet, or sink are used?

I hear a thumping in the wall whenever the second floor bathroom shower, toilet, or sink are used (sound is similar to if you let the bottom of your fist fall against a sheetrock wall). It is 'almost' ...
3
votes
1answer
4k views

How can I accurately measure the angle of my walls?

I have a lot of walls that slant inward. To measure the angles at which they slant inwards, I used an app that looks like: Was this the correct tool? Assuming it was, do I need to make sure I get the ...
4
votes
2answers
845 views

How to cover a window well seamlessly so I can project TV onto that wall?

Problem: I would like the projected image to cover the whole wall, but when I turn the projector on, the window is in the way. I bought a small screen (see the photographs) to try and cover that up, ...
3
votes
3answers
20k views

What is a good solution for hiding insulation in an unfinished basement?

First off, let me note that I am a tenant in this house. My landlord lets me do small improvements, but I'm not going to finish the basement with drywall myself. Basically, we have an unfinished ...
0
votes
1answer
4k views

Can I mount an 80" TV where only one stud is available? [duplicate]

Possible Duplicate: How can I mount a TV when I can’t find studs inside my wall? I am looking for some opinions here. When my electrician tried to mount my 80"TV above my fireplace, he found out ...
3
votes
1answer
1k views

Can I use 2-1/2“ metal studs to hang 1/2” drywall?

I am in the process of remodeling my basement, & it's ready for studs; the basement is small, so to maximize as much space as possible I was thinking of using 2-1/2" metal studs opposed to the 3-5/...
3
votes
1answer
3k views

What should I use as a base for my wall mounted PC case?

Here is an example of what I am trying to put together: What material could I use as a base onto which I can mount the motherboard, hard-disk and other wiring?
6
votes
2answers
311 views

Is cork an effective solution to reverberation problems?

I own a small English language academy in Spain. After a rebuild last summer I find that problems with reverberation persist. This is at its worst when less people are present but I'm looking for a ...
0
votes
2answers
550 views

What type of wall construction is shown in these pictures?

These photos were taken through a small hole in the wall of a house. They are of the inside of the cavity. The hole they were taken through is at a height of about 60cm from the internal ground floor ...
3
votes
1answer
1k views

How to fit things to a Bungaroosh wall

The walls in my house are made of Bungaroosh which means that attaching anything to them is most likely to hit some issues. Recently I've been trying to fit a floating shelf to the wall, but no ...
0
votes
1answer
1k views

What type of screws and rawl plugs should I use?

I have a a framed canvas picture that I need to hang on a the wall. It is about 3 foot in height and 2 foot wide. The wall is made of solid brick but has been boarded over with plasterboard and then ...
2
votes
1answer
763 views

Installing a swing set between two brick walls?

My neighbors and I are considering putting up a swing set in the alleyway between our houses. The space is about 10' wide, and the house walls on both sides are brick (about 4" thick). Which of the ...
2
votes
2answers
2k views

What could be causing wall cracks through the middle of our house

We have been fixing cracks in our interior, and exterior walls since we moved into our house 3 years ago, and it just keeps getting worse. Our house sits between a field that goes uphill at a 45 ...
8
votes
3answers
10k views

Can I wall-mount a TV when there is an air gap between the drywall and the wooden stud?

I'm mounting a 38lb TV (with a ~10lb mounting bracket). I located a stud, but the drywall floats an inch above it, plus the drywall itself is another 1/2 inch. So a couple 3-inch screws (and not a ...
-2
votes
1answer
281 views

How should I modify my wall such that I will not hear the electric devices noise from my neighbour? [duplicate]

Possible Duplicate: How do I soundproof my vaulted townhouse wall? My neighbor seem to have place a electric device (maybe aircon or a humidifier) on a wall that is shared between them and my ...
4
votes
3answers
7k views

How can I support a large aquarium built into a wall?

I have a wall that goes 3/4th of the way to the ceiling between my living room and dining room. I would like to put a fish tank in it, spanning the length of the wall. I have the engineering skills ...
4
votes
2answers
2k views

How do I prepare this porous interior wall for paint?

In one of the rooms in my house the walls are wallpapered. Underneath the wall is rough and porous (see picture). My plan is to strip the wall paper and eventually paint it, but research seems to ...
4
votes
2answers
297 views

Any tips on fixing a difficult wall for tiling?

I've got this small old bathroom that I want to lay with ceramic tiles. But to do that the walls should be straight - which they are not. Three of them are almost fine, but the fourth is... well, take ...
6
votes
1answer
239 views

How can I restore this interior wooden siding?

I have a small entry way with wooden siding by my front door. It's not in great condition from the previous owners and I was hoping there would be a way to restore or just make it look better. Could ...
10
votes
2answers
18k views

How to fix small holes in a wall caused by throwing darts?

I can think of a few ways of fixing these marks on the wall but I don't want to try anything without first getting some advice. I have a dart board on a painted wall and as is inevitable with darts, ...
3
votes
1answer
3k views

How to seam new stucco to old stucco when patching large areas

Our city inspector wants us to break out the edge of old stucco to expose the wire then tie that back into the new mesh. But when we did that, it became obvious to everyone (inspector included) that ...
7
votes
2answers
529 views

Are these brick walls properly constructed?

I'm looking into buying an apartment and I'm visiting some locations. During one of my visits I saw this exterior wall of a future apartment building: I'm not an expert but it does not look good to ...
4
votes
1answer
1k views

Should I use sugar soap or denatured alcohol to clean nicotine from painted walls?

I'd like to clean nicotine off of painted walls, but I'm not sure if I should use sugar soap, or denatured alcohol (methylated spirits). Which would do a better job all-around, specifically for ...
2
votes
1answer
409 views

How can I seal an old wood finish on a 60-year-old wall that is off-gassing?

We just moved into a 60-year-old house and most of it was recently painted with low VOC paint, although one original wall is a medium-color wood finish which is putting out a strange smell. One of us ...
6
votes
3answers
3k views

Is there an easy way to make a square hole in plaster/brick to put an electrical outlet box in?

I am about to fix a few new sockets, I can run the cables down the back of some built in cupboards, but would rather not use surface mounted sockets. I do not have a SDS drill, just a standard hammer ...
2
votes
1answer
631 views

What to best use to build an artificial wall in my house?

trying to build a wall in my new rented house to separate one big room into two smaller ones. Any recommendations on what to use and on how to build this?
5
votes
2answers
3k views

I removed this non-load bearing wall in the corner of my basement, now 2 doors upstairs rub on their frames. Why is this?

In the image below, notice where the small 1x1 bits are, running perpendicular to the ceiling joists. These was used by the previous homeowner to lower the ceiling in one room, so if you can imagine, ...
4
votes
1answer
892 views

How to prepare poured concrete wall for adhesion

I am considering the application of an artificial stone wall veneer onto a poured concrete wall. The wall is flat with no protrusions or other which might aid in adhesion. I do not know if any release ...
3
votes
1answer
348 views

How do I fix a fallen-off facade?

We live in a block of apartments made from bricks, and the wall outside one window is damaged. We have a clothes hanger attached to that wall, and one screw has already fallen off, and wall around the ...
0
votes
1answer
1k views

How can I hang a skateboard deck on the wall?

I have a Skateboard deck and I'd like to hang it on the wall. Analog to hanging a frame on the wall. I've thinking about it but I have no idea on how to do it. Firstly I was thinking to suspend it, ...
6
votes
4answers
12k views

How do I know if a firewall and mortar contain asbestos?

I want to remove a rock wall behind my pellet stove that was put in in 1980. I have already removed some of the rock and cement that holds the rocks together where the pellet stove is sitting. Then ...
0
votes
1answer
188 views

Is the permeability of normal shellac (flakes dissolved in spirits) the same as Zinsser B-I-N sealer?

I've made a whole batch of clear shellac for sealing ceiling and concrete floors in a heavily nicotine damaged apartment. But I'm worried now that there may be some differences between them, such as ...
3
votes
1answer
3k views

Should I install a wall before or after hardwood floor installation? [duplicate]

Possible Duplicate: Frame or floor planks first? I am building a small wall between two rooms. The existing flooring was carpet, which I have removed. I plan to install a floating floor (the ...
4
votes
1answer
11k views

How much thinset is enough?

I'm having a shower tiled and I noticed that the tiler didn't put thinset over the entire area, just on the back of individual tiles. The tiles are heavy stone 3/8x6x12. He used a 1/2 x 1/2 trowel to ...
6
votes
1answer
424 views

Designed a floating corner table, unsure of its potential strength. Any ideas?

I pretty much want to attach some angle iron to the studs and some threaded rods to the angle iron. I'll rout out the profile of the angle iron into the butcher block so it sits flush and so that when ...
4
votes
1answer
2k views

Do I need to install dry wall in my basement?

I have a concrete basement with concrete walls. I'm thinking about just painting the basement and not have to put up dry wall because I want to save money. Is that a good idea or should I really ...