Questions tagged [toilet]

For questions specifically regarding sanitation fixtures designed for removal of human waste, generally referred to as toilets but also including urinals and bidets. Topics include designs, installation, repair, plumbing supply and drainage, and sanitary concerns including cleaning.

123 questions with no upvoted or accepted answers
Filter by
Sorted by
Tagged with
0
votes
0answers
2k views

Overtightened tank bolts and caused cracks. What are my options?

In my case, the tank is intact, but the bolt hole in the base cracked off. The bowl itself is fully intact and water-tight. This is the bolt that holds the tank down to the base, not the bolt that ...
0
votes
0answers
1k views

How do I find the correct replacement parts for kohler toilet tank?

I need to fix the tank of this kohler toilet -- It is slowly and constantly draining into the bowl (enough so that the city called about excessive water usage). I'd like to replace the parts inside ...
0
votes
0answers
137 views

wall hung toilet advice

So… i’ve decided to go with a walmount but ended up saving a lot of money by NOT having an in-wall tank. I instead went the flush-o-meter route and discovered there’s nothing wrong with having a 5 ...
0
votes
0answers
793 views

How do I remove a broken toilet auger from my toilet?

My toilet is suffering frequent clogs that could be cleared with a plunger, but recurs the next time we send anything down. So I went and got the fanciest toilet auger at Lowe's, Cobra brand heavy ...
0
votes
0answers
363 views

How can I fix my loose toilet seat?

I have a toilet seat that has little by little, become very loose. I have searched the internet and found I had to tighten the two twisting things underneath the toilet bowl, in the back. They are ...
0
votes
0answers
8k views

Toilet water level lowers when other toilet flushes

I finally have 2 upstairs toilets working after a lengthy bathroom remodel. What I noticed is when one toilet is flushed, the other toilet water level goes down, almost all the way. The lower level ...
0
votes
0answers
187 views

How do I remove the vacuum behind my toilet's flapper valves?

Over the last 12 months, the toilets in my condo have becomes progressively harder and harder to flush. Once the flapper valve finally releases, they flush just fine, but it's getting them to release ...
0
votes
1answer
1k views

ABS offset toilet flange dilemma. Suggestions to make my 11" rough-in into a 12" rough-in. USA

Recently I started a thread to get advice on how to move a flange for a toilet so that I can wind up with a 12" rough-in when I'm done. It's problematic since I can't really work with the ABS under ...
0
votes
1answer
86 views

Does this flange seem like it needs replacing?

We just purchased a house that's about 30 years old. On the first floor a water mark developed on the ceiling, so I've been debugging the upstairs plumbing. My kids' bathroom toilet had some moisture ...
0
votes
1answer
788 views

Quick fix for a toilet that flushes water past the waste material?

I've recently moved into a rented property with a dual-flush toilet. When flushing the new water seems to be sent directly under any paper/waste that's in the bowl, causing it to "roll" over the top ...
-1
votes
4answers
497 views

Ground floor toilet started bubbling randomly and the water level has risen in the toilet bowl

We live in a house, we have 2 toilets 1 upstairs and 1 downstairs. The downstairs one started bubbling vigorously and the water level in the bowl started rising. Now flushing just increases the water ...
-1
votes
1answer
40 views

Audible thud when toilet flapper closes

I just installed a new toilet flapper, and there is a thud that now occurs when the flapper closes (not water hammer; rather, it seems to be the result of the immediate stop of water flow from tank to ...
-1
votes
2answers
36 views

Toilet problems with valve

After flushing, my toilet doesn’t sense that tank is full, so the water keeps running and it starts leaking, how can I fix that?
-1
votes
1answer
56 views

Toilet flushes, bowl fill then drains

Toilet was installed less then a year ago and has been working fine. All of a sudden, when I flush the bowl fills almost completely. It then drains slowly and almost completely. It takes maybe a ...
-1
votes
2answers
518 views

How to ensure the wax seal on my toilet is set properly?

I recently renovated our upstairs bathroom which included a fresh new toilet. We raised the flange to flush with floor level (technically a hairline above) and placed the wax gasket to the base of the ...
-1
votes
1answer
327 views

Problematic toilet flush

I really hope someone can help me solve this problem. I have three identical toilets in my house, two have had the flushing mechanism replaced (one is still the original). Both replacements are a ...
-1
votes
1answer
91 views

install toilet flange extender after subfloor is installed or after finish floor

Toilet flange is too low and needs a flange extender. Should it be installed after the subfloor ( the layer under the cement board for the tiled floor) is in place since it needs to be fastened into ...
-1
votes
1answer
625 views

UK - Leak on inlet on toilet cistern - New Parts

few videos and reading the instructions figured replacing the innards on the old flush system we had/ just broke was within my means but I've hit a roadblock. Currently having a leak from the inlet. ...
-1
votes
2answers
790 views

Toilet leaking into bowl

We had a HydroRight in the toilet for several years (with the split, dual flush handle) and all of a sudden, water began trickling into the bowl, and the tank would refill every 10-15 minutes, which ...
-1
votes
1answer
99 views

Can I install a valve-type toilet with an old elevated type tank?

Unfortunately my house does not have an attic, so I cannot put a large reservoir there, which would the ideal for running a valve-type (tankless) toilet. Can I install instead one of those old ...
-1
votes
1answer
2k views

Does the Fluidmaster 400A fill valve have a flow restricter?

My toilet tank takes 2 min 11 sec to refill. It uses the Fluidmaster 400A. Water pressure is good and we don't have hard water or sediment. Does the 400A have a flow restrictor in the shank? I would ...
-1
votes
1answer
271 views

Toilet is not flushing properly

When I flush my toilet it does not flush with power. It's very weak. I'm constantly plunging it, and there are times when the bowl doesn't fill completely.
-3
votes
1answer
56 views

Looking for a bathtub door

I'm looking for a stylish glass shower door. Which will be good between frameless and the framed sliding tub door?

1 2
3