Questions tagged [television]

A television (or TV) set is an appliance that allows you to view moving pictures and hear sound. Use only for questions about mounting television sets to a wall or other structure. Questions about buying or using TVs are off-topic. Use with the [mounting] tag.

30 questions with no upvoted or accepted answers
Filter by
Sorted by
Tagged with
2
votes
2answers
92 views

Mounting articulating Arm for TV (43”) to wall with metal studs

I’d like to mount an articulating arm for my 43” TV in my basement, however have metal studs unfortunately. The mount is made for a single stud install. Luckily I have access to the back side of the ...
2
votes
2answers
10k views

How can I hide television cables on a brick wall?

My handyman mounted my TV and cut holes at the top and bottom so we could hide the cords. He went to put the cords through the hole and found a surprise layer of brick in between the holes so he ...
1
vote
0answers
42 views

Mounting TV to unusual existing mount

I have problem with using a TV wall mount left by previous owner. Remaining is a wall plate part with a single lug (3 1/8" long, 1/2" hole). I never saw something partial like that. Usually ...
1
vote
2answers
122 views

Mount Heavy TV onto re-patched drywall

My contractor just installed our new 65 inch TV into our wall. The problem is it's about one inch too high. There are now 9 holes drilled into the wall, and only 2 holes is into wood. The rest is with ...
1
vote
0answers
119 views

TV won't stay on if plugged into a certain outlet

I have an LG TV. It somehow tripped itself and just keeps blinking red and green on the power light and when I get it to turn off it stays for a second and then goes back to blinking. I swapped it ...
1
vote
0answers
43 views

Mount TV on Slate Tile accent wall without studs?

How could I mount a tv on a slate tile accent wall. I don't think there are studs behind the tile, it is a hollow space. Another problem is my wall mount only has 2 holes to bolt to the wall. Wall in ...
1
vote
0answers
114 views

Hit metal while drilling into wall to mount TV

I'd like to mount a TV in the same spot as the condo owner previously mounted theirs. There are 4 existing holes that use Toggler-brand SnapToggle toggle bolts, but they do not align with my mounting ...
1
vote
1answer
85 views

Mixing power and signal cables

I have to pass the TV signal cable near the power cable for lighting in my room, and I observed noise in the TV. If power and signal cables are near each other, does the power cable have a magnetic ...
1
vote
0answers
266 views

Are gas lines installed above fireplaces?

I am trying to install a TV above my fireplace (I know) and I hit something that looks like a metal pipe and I'm worried it's a gas pipe. Logically I assume no one would ever install a gas line above ...
1
vote
2answers
652 views

hanging 140 lb on wall with metal studs

I am finishing my basement and have metal studs on the perimeter (just in case of any moisture penetration. Planning on hanging an 85", 140 lb flat panel on the wall. The drywall is not up yet, so ...
1
vote
0answers
507 views

49" TV wall mount with full motion bracket on plasterboard

I recently purchased the LG 49SJ800V. I would like to wall mount this TV using a full motion TV bracket (like this). Aerial and electricity sockets are located at 1.83m from the floor on a ...
1
vote
0answers
202 views

Mounting a tv on a sandstone wall

I just bought a new TV for my bedroom, and I want to mount it on the wall. The only problem is that the walls of the house are made of sandstone and if i mount it directly to it, it won't hold. I was ...
1
vote
0answers
181 views

How can I combine a tv signal from the wall to an amplified antenna into my digital TV?

I am having a very difficult time receiving OTA DTV signals and want to combine a few different antennas. I purchased a splitter that actually combines different signals, and it works, but this is ...
0
votes
0answers
46 views

TV Wall mount permanent bracket arcs forward

Last night I installed the TV mount bracket on the drywall with two stud support. This was my first ever D.I.Y. lol. Meanwhile, it looks all fine and everything is in place but I noticed that the ...
0
votes
0answers
42 views

Mounting a television on an older stone fireplace in a semi-remote cabin?

I have a stone fireplace in a cabin that I'd like to mount a television screen on. While I’d love to pay someone a reasonable fee to do so, the cabin is in a location where contractors are few and far ...
0
votes
0answers
36 views

I need a longer 4x4 board

I am having trouble finding 4x4's for an outdoor project right now. I'd like to mount an outdoor television about 5.5 to 6 feet from the ground. I was planning to use two 4x4x10' pressure treated ...
0
votes
0answers
48 views

Asbestos in chimney bricks and mortar?

I have recently purchased a house built in 1931. It has a chimney that would be a great place for a tv mount. I want to mount on the opposite side of the fireplace - not above it. I read recently that ...
0
votes
1answer
101 views

HDMI Connection flickers when ceiling Fan is switched on/speed increased

I have my desktop computer connected to the TV using a 1mtr HDMI cable. I wanted to reposition the desktop and hence bought a cheap 3mtr HDMI cable. With the new cable I noticed that whenever I switch ...
0
votes
0answers
25 views

Indoor and outdoor TV location remote control issue

Does anyone know if televisions usually share the same code for power when transmitting on a remote? I have a location on a covered patio that I would like to place a TV that is near a wall mounted ...
0
votes
0answers
208 views

New TV / Old Mount: Bracket Options?

Replacing our 10-year-old TV with a newer TV. The caveat is, I must use the existing wall mount (due to custom stone-work): Now the older TV bracket works well for the 600x400mm VESA dimensions: The ...
0
votes
1answer
158 views

GFCI daisy chain problem

I'm in a 2006 mobile home that has a GFCI plug in behind my microwave it's the only plug I have for it. Theres five more regular plugs down stream from it that all say GFCI on them because they're ...
0
votes
0answers
45 views

Hanging a 32 inch TV without snap toggle on plaster

I'm looking to hang my tv on a bedroom wall however there is only one stud on that wall. I tried using a snap toggle but behind the plaster, there's concrete that won't allow the snap toggle to fit. ...
0
votes
2answers
58 views

Hanging a TV board ( 70“ x 72” ) and 100 lbs

I need to hang the large TV board onto my wall. The wall is 1/2" drywall mounted onto 3/4" thick wood furring strips which are mounted onto cement block. The TV board has 3 wood blocks that are to be ...
0
votes
0answers
77 views

Bad and deteriorating TV signal

I use a WISI OR 152 set-top box to receive a DVB-C TV signal. A couple of months ago I rearranged my living room and as a result I had to connect the receiver to the wall outlet with a rather long (~...
0
votes
0answers
58 views

My tv screen goes black and back on when i open the door

I moved into a house and i noticed that whenever anyone opens the outside door my tv screen goes black and back on couple times. I have laptop connected to tv. Nothing else is affected but the tv. ...
0
votes
0answers
577 views

Installing TV on metal studs

So I tried installing my new Samsung 55" inch LED above the fireplace on an articulating mount (about 45 pounds on the TV) and found metal studs. I decided to open up the wall and install 2x4 wood ...
0
votes
0answers
64 views

What is behind my plasterboard!? Studs appear to be random in position and length!

I'm hoping to mount a 23kg tv on an articulating mount to a plasterboard wall and I gather they are supposed to have studs running vertically behind them with even spacings... BUT, stud finder is ...
0
votes
0answers
1k views

Is it possible to make my own DIY one way mirror

One way glass and perspex is quite expensive. But regular perspex is not. I've seen some mirror finish sprays. Has anyone tried successfully to make a one way mirror using those or perhaps another ...
0
votes
0answers
556 views

How do I fix the issue with TV tuner?

I have an old CRT TV (Samsung) that has been running for several years with just a couple of repairs and with no major issues. Now, there is a problem with channel changing (when you change a channel ...
0
votes
0answers
249 views

Minimum non-combustable mantel height then TV over fireplace

What is the minimum non-combustable mantel height over a flush mount linear fireplace. Then what is the minimum aditional height to the bottom of an off the wall momounted TV? I have a family room ...