Questions tagged [shed]

Smallish freestanding building, used primarily for storage.

Filter by
Sorted by
Tagged with
27
votes
4answers
3k views

Why does my shed door expand/shrink?

I built a shed door last summer and have had a few problems with it since. Using pressure treated outdoor timber I made a fairly simple shed door. I wood glued the long planks together and then used ...
19
votes
7answers
59k views

What can I do to keep my shed (or house) free of spiders?

I've got an old shed at the end of my garden, this summer I gave it a complete cleanout, but within a few weeks it was back to its cobweb infested state. Being quite an arachnaphobe, it makes getting ...
9
votes
3answers
1k views

Running electrical to a shed

I have a shed in my backyard about 200ft from the house. I would like to run electrical to the shed to install 2 or 3 power outlets, and two LED lights for the inside. Currently from the house to ...
9
votes
3answers
1k views

Where can I find legitimate wood shed designs?

Where is a good place to find good shed designs? Googling around just gives me a bunch of poorly designed websites that scam people into their site by advertising free designs and charging for them. ...
8
votes
5answers
19k views

How can I prevent an outside lock from freezing?

I store a bunch of the "outside stuff" in the shed for the winter. Mainly things that I only use when the weather is warmer. It pretty much remains locked up for the winter. Occasionally though, I ...
7
votes
1answer
27k views

How can I join 2x6 pressure treated wood for a shed base?

I am creating a wood frame for my Suncast Sierra shed. I already weighed the pros and cons of each option for a base and came out with a wood frame as the most economical with all factors considered. ...
7
votes
2answers
10k views

How do I build an on grade foundation for a shed?

After asking a couple of questions about what type of foundation to place an 8x10 vinyl shed, I am now ready to build an on grade foundation. Can someone point me to detailed instructions for how to ...
7
votes
2answers
25k views

Do plastic sheds require a foundation?

Do I need a foundation for this type of shed, or can I just put it on level ground?
6
votes
5answers
2k views

Ground-level electrical wiring to shed outdoors possible?

I was telling an uncle about the concern of digging a conduit trench in my heavily planted garden (trying not to disturb the plants) to run electricity from the house to the shed about 35 feet away. ...
6
votes
3answers
1k views

Can I install a row of bricks on a slab to support a shed?

I am designing a shed for my garden and I would like to build the shed inset from the concrete base by about 20cm on each side. The concrete base already exists (built before I brought my house). It ...
6
votes
2answers
22k views

Am I using the correct concrete blocks for the base of my shed and how many do I need?

I'm building a Suncast Sutton storage shed. I followed the instructions and built the wooden base as described. Based on many tutorials I've read online, I decided to use concrete blocks to level ...
6
votes
1answer
123 views

How should I organize a workspace to take my handedness into account?

I'm in the process of building myself a workbench and shed space and with only a very limited amount of space, some things have to be very carefully positioned. Having grown up with a left-handed ...
6
votes
1answer
2k views

How can I repair rust damage on a steel shed?

I have a shed in my backyard that came with the house. It's made out of what I presume is steel sheet metal. Overall it's in good shape, but there is some rust damage on one side that is getting ...
5
votes
2answers
143 views

Question about outswing door on attached toolshed

I have a toolshed attached to my garage with an outswing door. The door appears to be screwed into the moulding instead of the stud. Is this typical for an outswing door (see photos)? Photo album I'...
5
votes
1answer
9k views

Is a ridge beam necessary for a small shed roof?

I am planning a 12x8 shed and looking at frame designs on the web. I see a mix of ideas out there that are all presumably just as good as the next. One inconsistency I see is that some roofs have a ...
5
votes
4answers
26k views

How can I “seal up” cracks in my wooden shed between wooden slats/floorboards?

I've got a new shed being put up this weekend, I want to try to seal it up to keep some of the bugs from taking over. After looking around Focus DIY (large DIY chain in the UK) I found some "wood ...
5
votes
1answer
236 views

Trenching and running power to outside shed

I'll require power for the use of a window unit heat pump (8,000 to 12,000 BTU 120 volt), a treadmill, 5 or 6 outlets, and lighting. It's an 80 foot run and will be burying the supply underground. I'...
5
votes
2answers
2k views

How can I repair a crumbling shed base?

I think I know the answer to this already but its worth a punt. I laid a 4mx3m shed floor (clearly badly), with about 10 cm of hardcore and 7.5cm of cement, that whilst in the middle appears fine, on ...
4
votes
4answers
3k views

How can I add a piece of timber to my metal shed wall without creating a leak?

I have a garden shed with steel (powder coated) walls. I'd like to attach a piece of timber to the inside of the wall. I'll use the timber to attach hooks for hanging tools. I don't want the holes I ...
4
votes
4answers
36k views

How many concrete piers do I need to support a 10 x 10 wooden floor supporting a 1600 lb shed?

Aptos, CA, United States. As you've probably noticed from my prior post, I'm in the process of building a foundation for a garden shed. My specific county/region does not have strict restrictions/...
4
votes
2answers
747 views

What are some tips for installing a small shed?

I want to put in a small shed to store my push lawn mower and perhaps a few other things. Our village's website states we need a permit: SHEDS – Must be either anchored to a concrete slab or have ...
4
votes
1answer
1k views

How can I know if a self-designed structure I build will be structurally sound?

I've recently begun designing and building structural updates to my house. For example, I've built some shelving units and a cabinet space. Everything has gone well so far, but I'm about to tackle ...
4
votes
1answer
5k views

Framing a 10x12 wood floor, using 2x6 PT lumber

I am building a foundation for a 10x12 metal/vinyl coated shed. The foundation is ready with four 12" diameter concrete pillars and another three pillars down the center. I used concrete strong tie ...
4
votes
1answer
11k views

How can I insulate a shed floor?

I am currently planning on insulating my shed this summer to allow year round usage. My first step is to insulate the whole shed. - The walls and Ceiling are straight forward, I will be ...
4
votes
1answer
226 views

Adding subpanel to a shed

Thanks in advance for anyone providing insight for me. I apologize if answers for my situation can be found in another post that I've missed. I have a shed outside my home that currently has no power....
4
votes
2answers
1k views

How can I put a plastic sky-light in a shed roof?

I have a large shed with a shallow angled roof made from 9mm OSB board and supported by wooden beams every 3ft approx, and covered with standard shed roofing felt. I want to put a few sky-lights made ...
4
votes
1answer
106 views

What is the best way to board interior of a large shed?

I have a large shed/workshop which I want to board with OSB/Ply to make the interior more usable for hanging things from the walls and to just generally make it "nicer" inside. I'm not fussed about ...
3
votes
3answers
596 views

Can I use 2 runs of 10/2 UBF for my Shed 90’ from House?

I want to run a window AC unit in Summer And an electric heater in winter. That for one 20Amp circuit. Other circuit for lighting and miscellaneous power tool operation. The 20A breakers square D ...
3
votes
2answers
181 views

What can I do to make my galvanized steel shed stronger?

Here are my specs so far for the shed I am getting made. I plan to use it as a shed for my very large tools. It is 40 ft × 24 ft, with 11 ft high walls. It is made from galvanized steel while the ...
3
votes
3answers
366 views

Running multiple 20A circuits to a shed

I have an outdoor shed that was powered with a single 15A circuit by the previous homeowner. I'm trying to rewire it to carry three 20A circuits. It's about a 100' run from my main panel via 1/2" ...
3
votes
2answers
33k views

Where do I measure a building's height on uneven ground (for UK Planning restrictions)?

UK Planning states that an outbuilding must remain below 2.5m in height, otherwise planning permission is required. My problem is that the ground is uneven, but the roof would be flat, so where do I ...
3
votes
4answers
135 views

Help cutting/squaring floor joist for shed

I am a novice, and i am trying to build a shed myself. I don't have any framing experience. I purchased a miter saw, and a circular saw. The plans call for 2x8 floor joists with 3 inches shorter on ...
3
votes
1answer
2k views

Shed floor framing out of square 3/4 inch

My first time building a shed by myself and it's been a lot of work, since it is on a slope. I got the piers and columns in, had it squared, and put cut plywood in the corners. I cut all the joists, ...
3
votes
1answer
210 views

Power to loafing shed

I need to run power to my loafing shed for lights, fans and blowers for show livestock. The blowers pull almost 20 amps each so here is my plan. Underground service using 4 awg thwn in conduit. 130 ...
3
votes
4answers
1k views

Shed with gaps at the top, wasp nest come back every year

I have a nice shed in the backyard but every year wasp nests reappear in there. the shed has these 2x4 sized gaps between the roof and the side walls on the sides of the shed. I saw a recommendation ...
3
votes
2answers
83 views

Joist design for shed/workshop

I am in the process of building a roughly 12' x 16' shed/workshop. It is going to be a pier-and-beam design. There are 8 concrete piers, 4 on each side, that will support 2 4x12 beams. The span from ...
3
votes
1answer
334 views

Have Shed/Man Cave & Need Unground Power Advice

I have a shed which is a little less than 100 feet from my home breaker box. I currently am poor-manning it running a 100 foot extension cord out there. I have already purchased a branch electrical ...
3
votes
2answers
42k views

What size breaker and wire do I need for a subpanel in my shed?

I am wanting to run power to my shed/workshop. I will have 8 outlets running table saw and such not everything at same time also will have shop lights and a separate 20 amp circuit for pool pump. ...
3
votes
3answers
801 views

Ramp for a tool shed

I need to build a ramp into a shed to roll carts in and out. It has to be removable. Door opening is 50", rise is 10" and I have 48" of space in front of the shed. Max weight on the ramp at one time ...
3
votes
2answers
256 views

Will it damage my washing machine and tumble dryer to be left in a shed for storage

I have a Miele washing machine and tumble dryer, each worth around £600, that I bought last year. I just moved houses and my new already has a washing machine and dryer. Would it be safe to wrap ...
3
votes
1answer
882 views

How can I fix a tilted concrete shed footing?

We just bought our first home, and it came with a shed (hooray! Workspace!). The shed has a footing that's about 8" wide and runs the perimeter of shed, and at some point erosion has caused the part ...
3
votes
2answers
2k views

Should I use pressure-treated wood for a firewood shed?

Should I use treated wood or not? Is it preferred to use treated lumber for the studs and plywood for a firewood shed? Is there a reason not to use treated wood?
3
votes
2answers
2k views

What do I need to do to prepare for a storage shed?

I'm thinking of putting a small shed (something like this -- a Montana 8' x 10' mini-barn) and wondering what I need to do to prepare. I was thinking of getting a load of gravel, and having a bed of ...
3
votes
4answers
1k views

Tuff Shed and adding climate control

I live in north TX near Fort Worth. Not a humid place but a very hot place, averaging 104 degrees in the summer outside in afternoon. I was planning to buy a Tuff Shed 16 X 20 shed with asphalt ...
3
votes
2answers
402 views

How do I make a good base for a shed?

I would like to make a 10' x 16' shed using concrete blocks for the base. Should I put sand or cement under the blocks?
3
votes
1answer
3k views

How should I build a skid foundation for my shed?

I am planning a 14 x 20 shed, going to build on a 4x4 skid foundation, I can only get 16ft 4x4, what is the best method for the 4 feet left? Should I make all the joints at one end or use 2, 10 ft ...
3
votes
1answer
137 views

How to fit a pvc window to a corrugated metal shed

I have a corrugated metal shed which i want to fit a pvc window. I am not so sure how should i approach to this. The shed looks like the one pictured below but there are 2 vertical perimeter channels ...
3
votes
1answer
150 views

Estimating frost heave displacement?

I'm planning a storage shed underneath a deck. I'll assume that the deck is anchored below the frost line and won't move when the ground freezes. I'd like to build the shed on just a floating gravel ...
3
votes
1answer
2k views

How can I run power to my shed from my pool electrical panel

I have a single 15 amp breaker available in my pool electrical panel. I would like to run power from there to my shed for a handful of outlets and a pair of light fixtures. I plan to bury metal ...
2
votes
3answers
629 views

Do I have to do anything special when laying a shed? Ie foundations/bases etc?

I know there is already a similar question but focused on plastic sheds My question is, I'm thinking of investing in a shed for my garden, but do I need to do any preparation or can I literally just ...