Questions tagged [receptacle]

A contact device installed at the outlet for the connection of an attachment plug.

Filter by
Sorted by
Tagged with
0
votes
0answers
27 views

Changing outlet with 3 live wires, 3 neutrals, and 1 ground. Question / seems kinda crowded? [duplicate]

Images: https://imgur.com/a/NbXxkFl I was going to change out this outlet. It was previously all shoved together in a back-wire type outlet (The kind you just stab in). Was going to replace with a ...
3
votes
2answers
77 views

How do I relocate a generator inlet box?

From the images above, I have a 30 amp generator inlet that connects to a transfer switch. I’d like to relocate that inlet box to the outside of the house so that I don’t have to run my L14-30 cable ...
3
votes
1answer
3k views

using two outlets as extension cord

I'm helping a friend build a cabin and we have a generator. I was wondering if I could wire an outlet on the outside of the cabin and another inside. The outside outlet would be for power in and the ...
0
votes
1answer
90 views

120v on black and white wires

I have been troubleshooting this for some time now. Any help would be great! A friend of mine's wife plugged in a hair dryer and lost power about 2 minutes into it. A few hours later the power was ...
0
votes
2answers
61 views

GFCI outlets in kitchen

I was wondering if i could have one outlet control all counter outlets? I need to replace some and trying to do this cheaper. I'm buying a property and trying to get it up to code.
1
vote
2answers
141 views

Blender killed outlet?

tl/dr: It seems a finicky blender killed my outlet - My blender initially turns on but then stops after a moment, and won't turn back on. I plugged a night light into one plug and it turns on ...
2
votes
3answers
93 views

Installing outlet receptacle in unfinished basement furnace/water heater room

Recently bought a house with a furnace/water heater utility room in the basement surrounded by a bedroom and playroom space. We just had a water filtration system put in this room that requires a plug....
0
votes
0answers
62 views

How to extend a power outlet from an existing outdoor light

There is an outdoor light owned by HOA, located outside of the door of my apartment unit. And I'd like to install a security camera near the light. There is no outlet there, and How can I extend an ...
4
votes
5answers
1k views

Is it OK to draw different current from L1 and L2 on NEMA 14-50?

I want to power a rack of commodity servers with 110v power supplies from single NEMA 14-50 outlet. I plan to distribute servers between L1 and L2 such that even at full tilt current on either side ...
1
vote
1answer
79 views

Outlet box has voltage when a device is plugged in on another circuit

Our house was built in 1964 and I wanted to replace some of the electrical outlets. However, there's something bothering me. When I turn off the circuit for an outlet, my low range non-contact ...
12
votes
3answers
3k views

Can ground attached to neutral fool a receptacle tester?

I'm using a basic outlet tester like the one from picture below. Let's say someone wired the ground to the neutral in some outlet, to provide a fake ground. What would the tester report? Would it be "...
0
votes
0answers
60 views

How to measure power usage on a 120V circuit that can go up to 20 Amps?

I want to measure the power coming out of a 120V outlet that can go up to 20 Amps. A standard household circuit is limited to 15 amps but this is a special situation where we're running our own ...
3
votes
1answer
72 views

Does my wiring plan sound OK?

I bought a house built in '69 in northern VA a few months ago. Having mapped out the upstairs circuits, I've discovered that the whole place is a wiring mess. I am remodeling each room and bathroom ...
1
vote
2answers
60 views

Adding hot receptacle from current light switch power?

My current situation is power comes into light switch and then to receptacle controlled by light switch. I need to add a hot receptacle. I assume I can pig tail the incoming power wires inside the ...
0
votes
1answer
61 views

Line to GRN or Neutral to GRN blowing my GFCI?

I just helped my friend change an outlet in the garage of a home he just moved into. The outlet was an old duplex that I replaced for a GFCI. The installation went fine, outlet tested properly and ...
0
votes
1answer
106 views

How to wire GFCI combination switch/receptacle

I’ve looked all over and I can’t seem to find any diagrams for this specific application. I have a combo switch/outlet GFCI receptacle that is midstream on the circuit and I want to wire it so that ...
2
votes
1answer
325 views

Electrical Outlets not working after pressure-washing the house

I just had my house pressure washed and my power to my bathroom does not work. The breaker for my bathroom/outside receptacle did not trip. I replaced the outside outlet and the electric still didn't ...
0
votes
1answer
83 views

Double-pole breaker connected to two receptacles/outlets on same column/post

We have a double-pole breaker that seemingly is connected to two outlets in the same column/post in a room. 3-Light tester reads all three lights, multimeter reads around 240 volts in each outlet. ...
0
votes
3answers
185 views

can I convert four-wire 250 volt, 30 amp dryer to two 125 volt dual outlet receptacles?

Can I use the 10 gauge wires (red, black, white, ground)from 30 amp, 250 volt dryer receptacle for two 125 volt circuits for two separate duplex receptacles? Can I use stranded wire for jumpers, or ...
0
votes
2answers
86 views

Electrical: Wall Outlet Requirements

I am looking at the electrical code and see a couple things that read a bit... vague, or perhaps not quite easily interpreted. Any wall greater than 2' wide must have an outlet Does this mean ...
2
votes
2answers
76 views

What is the easiest solution to add receptacle along an unfinished, exterior, insulated, basement wall?

I need to add a pair of receptacles along an unfinished, insulated, exterior basement wall. I want the easiest method possible. I have no plans to finish the basement. I need each receptacle to be on ...
0
votes
0answers
36 views

How to chase down an open neutral and low voltage issue

So I bought a home built in the '70s. The circuit in question includes a couple of garage outlets, half of the spare bedroom outlets/light which shares a wall with the garage, hallway light, and an ...
5
votes
2answers
747 views

What is the max number of outlets on a GFCI circuit?

I found a couple of related questions about one GFCI for several outlets How do I properly wire GFCI outlets in parallel? How can I find the first receptacle in a circuit? But I am not finding ...
0
votes
4answers
2k views

Breaker keeps tripping even when nothing plugged in

My bedroom breaker keeps tripping even when nothing is plugged in to any of the outlet linked to this breaker. Sometimes it will keep tripping when I try to push it back up and after 10-20 min' turn ...
2
votes
1answer
132 views

Can I convert a fused dryer outlet to two 20 amp circuits?

We have a dryer plug we no longer use. We would like to make it a quad outlet box instead. The outlet is wired to a fuse panel with 2 30 amp cartridge fuses. Is it within code to switch those 2 fuses ...
1
vote
1answer
36 views

Can I install an outlet near the ceiling of a pavilion?

I'm in the process of building a pavilion. I'm doing the work myself. We are hanging a TV from the ceiling. I was planning on installing an outlet near the ceiling so I can plug in the TV. However,...
4
votes
1answer
59 views

Minimum distance from receptacle terminal to conduit connector

Is there a minimum distance required from a receptacle terminal to a conduit connector? Surely this is defined in the NEC somewhere right?
0
votes
3answers
136 views

Can I split the feed to a duplex 20 amp receptacle from different capacity circuits?

Is it possible to split-feed a 20 Amp receptacle with one receptacle using 15amp and the other 20amp circuits?
2
votes
0answers
49 views

Extend/splice 12/2 romex along concrete finished wall

I would like to extend some wiring for a counter outlet that is running behind a refrigerator, which currently encased in a metal "cable concealer" raceway. Note: wiring is in a raceway because most ...
4
votes
1answer
88 views

Grounding for Outdoor Outlet

I have an outdoor outlet about 60' from my house. It is properly wired using an underground cable with ground. It is in a plastic box with plastic conduit protecting the stub-up. Recently a tree ...
0
votes
1answer
47 views

Open concept kitchen

For a 26ft outside load bearing wall i am opening up with 2 26ft lvl, Will I need a support column in the middle or can i just do the support columns on both ends. I have enlarged my kitchen. Now I ...
5
votes
3answers
1k views

How to wire 3 hots / 3 neutrals into this new TR outlet with 2 screws?

I'm redoing some of the outlets in our house, as they are pretty loose. Some of these have been really easy, but I came across one today where there were 3 hots and 3 neutrals. All 3 were going into ...
1
vote
2answers
152 views

Can I run a #12 outlet branch and a #14 light branch off a 30A breaker?

Was wondering if i can feed an entire room with one 30 amp breaker, 10/2 to an attic junction box, then break out 12/2 for outlet daisy chain (four 15 amp-type outlets) and 14/2 for a light circuit.
0
votes
0answers
39 views

Wiring is dead in 4 outlets

I have 4 outlets that are dead in my 2nd floor bedroom. I checked the wiring and the wiring is dead no juice. The circuit breaker is not tripped. What would cause the wiring to die?
6
votes
3answers
480 views

First time changing switches and outlets (receptacles). Anything special I should know?

I am replacing a bunch of switches and receptacles in my house. While I understand the basics, this is pretty much my first electrical project, and I figure there must be some hidden "gotchas" or ...
1
vote
1answer
64 views

What to do with an underground pool outlet now that the pool is gone

I took down a pool that has an underground wire( through conduit) that has an electrical outlet that supplied power to the pump. What can I do to terminate the outlet ? The yard is set to be filled ...
1
vote
0answers
89 views

Running electrical on outside of house

I need to convert an outlet to 230V 15A for a window AC. Unfortunately the outlet is on the second floor, outside wall of a solid brick house. I’m considering punching a hole through the back of the ...
2
votes
1answer
197 views

NEMA 6-15 to NEMA 6-20 A/C unit

My energy provider sent me a WiFi A/C system to hook up to my window unit, however, I cannot plug it into my wall because I appear to have a NEMA 6-15 outlet that matches the plug on my A/C unit and ...
3
votes
3answers
654 views

Does this violate electrical code? (UF run plugged into GFCI to use smart outlet)

I built a deck on the back of my house last year and installed a new breaker and a handful of outdoor electrical outlets. I wanted one outdoor outlet to be switchable via a smart outlet, but my smart ...
8
votes
4answers
2k views

Why are 120 V general receptacle circuits limited to 20 A?

The NFPA-70 (National Electrical Code) prohibits the use of breakers larger than 20 A for general receptacles. But I have my doubts. A 20 A breaker on a 120 V circuit with appropriately sized wires ...
3
votes
1answer
105 views

Circuit Not on Any Breaker, but Off with Main Breaker

Looking through my main panel today I discovered that at least 1 circuit does not appear to be attacked to any breaker. If I turn off the main breaker of the house, the circuit does turn off. How can ...
0
votes
1answer
145 views

Installed Self-Grounding 3 prong in place of 2 prong

I had a 2 prong plug in place where I needed a 3 prong. (no heavy loads, just TV and such) I read about replacing this with a 3 prong and found out the following: If the hot end to the box screw ...
1
vote
5answers
673 views

Replacing receptacles - why are white and black wires crossed?

I am in the process of replacing all receptacles and wall plates in my home. Most of the receptacles are pretty straight forward to replace as they have only one black and one white wire (and ground). ...
3
votes
2answers
631 views

What kind of wire should I use to pigtail an outlet?

I want to turn my 2 hot and 2 neutral wires into a pigtail for my outlet. Since I don't have any extra wire or black wires, what kind should I purchase? The wires in my receptacle are copper.
0
votes
1answer
131 views

Outlets are half voltage and/or don't work

I have a old house with knob and tube wiring and today my breaker keeps tripping. I have a couple of 240v outlets (dryer and range) that are on different breakers. I get 115v readings from each of ...
1
vote
0answers
44 views

Dedicated 240v 30A Circuit Switched for A/C and NEMA 14-30 [duplicate]

I have a dedicated 240 volt circuit that's hard wired into my air conditioning unit. The circuit has a 30 amp breaker at the main box and another 30 amp breaker on the wall next to my air conditioner....
15
votes
4answers
6k views

Loss of power when I remove item from the outlet

I have this unusual electrical issue in our master bedroom. I was wondering if anyone else has experienced this. We have this $3 LED night light in our bedroom and when we take it out, the power/...
0
votes
4answers
119 views

3 wire outlet.i know white goes with silver and black with copper. Does the order they go matter?

There's six wires plus a ground. Wich one goes where?1234?🤷‍♂️
2
votes
3answers
135 views

Can I add an additional outlet using an existing outlet that has no ground wire?

I am looking to add new receptacles (15A) behind my TV by running a 12/2 romex (20A circuit/breaker) from a nearby existing receptacles (15A). The problem is, the existing receptacle has no ground ...
1
vote
2answers
146 views

Can I connect an LED light fixture to a 240 volt oulet?

My question: I'm replacing a metal halide fixture with a LED fixture. The outlet is single phase 240V (split with no neutral). Is it ok to connect the LED fixture to this outlet? I'm asking because ...

1 2 3 4 5 21