Questions tagged [plywood]

The tag has no usage guidance.

18 questions with no upvoted or accepted answers
Filter by
Sorted by
Tagged with
2
votes
0answers
26 views

How can I quickly seal wet pressure-treated plywood?

I am replacing the floor in my camper and want to use 3/4" pressure-treated plywood but I want to apply some water sealer before I lay it down. Is there a way I can do this without waiting a lengthy ...
2
votes
0answers
8k views

How long can pressure-treated plywood be left wet?

I built a 12'x20' shed foundation on the Oregon coast last Summer. It is 3/4" pressure-treated Doug Fir plywood over P-T framing. The plywood was very wet when purchased and installed wet like most PT ...
1
vote
0answers
29 views

laying plywood flooring over potential asbestos floor tiles

I have removed old carpet in the main bedroom which has exposed potential asbestos containing floor tiles (this is not confirmed but the look of them and age of the house is a strong give away that ...
1
vote
1answer
38 views

Do I need to add plywood underlayment over plywood subfloor?

I am replacing downstairs flooring that had three layers before the subfloor. Linoleum, Cement Board and Tile. All flooring had to be removed down to the subfloor due to water leak. Since the cement ...
1
vote
0answers
60 views

Installing Plywood Underlayment over Plywood Subfloor

We are renovating an apartment and trying to install a 3/4'' solid hardwood floor in the living room. We pulled out the existing carpet along with a 5/8''particle board underlayment. Under that we ...
1
vote
0answers
606 views

Squeak AFTER Carpet install

We just had new carpet installed. My once quiet floor now squeaks all over. Prior to our last carpet install we'd screwed everything down and it was perfect. The only thing I can think is that they ...
0
votes
1answer
25 views

Redgard between kitchen plywood and backer board

I'm replacing my kitchen floor and have got it down to the plywood. 2 questions please. 1, can /should I use redgard between plywood and backer board? 2, getting conflicting answers, should I apply ...
0
votes
0answers
43 views

What Medium to Use On Plank Subfloor For Porcelain Tile

Story My wife and I are remodeling our kitchen, and our contractor ask us if we want to remove the hardwood in the kitchen. He said that keeping the hardwood will make the floor solid. I did some ...
0
votes
0answers
21 views

Replacement of Open Deck Material above Garage

Water leak through vinyl and plywood from open deck, some area of plywood is rotten and become soft when walk on the surface of vinyl. The deck is 12' x 24', total of around 288 square feet. I would ...
0
votes
1answer
31 views

Remove damaged flooring under edge of fiberglass tub and direction of new underlayment

I am currently living in my grandmother's old house (built ~1940 or before) where I have yet to find any previous repairs done correctly. The house is a two bedroom, one bathroom mill house type ...
0
votes
0answers
25 views

How can I cut and glue brittle foam panels onto my van without breaking it?

I brought some very thin (1mm) wood panel strips to glue into my van (over the insulation to make it look nicer). However the wood is very brittle and thin, I have to attach it to some curved ...
0
votes
0answers
101 views

melamine paint onto plywood - blotchy

I appear to be unable to get an even matt finish despite giving the plywood two coats and allowing for 24hrs to dry before applying another. Problem is it appears to be blotchy in certain areas why? ...
0
votes
0answers
64 views

How can I make vertical blinds with wood vanes?

I was thinking of 1/8" Luaun or baltic birch. I would like to use a clear coat or dye-stain plus varnish. Yes there are a raft of types of plywood. Other suggestions welcome. By dimensionally ...
0
votes
0answers
394 views

Should I use MDF or plywood behind my wooden burner?

I want to mount a cast iron wooden burner like in the image close to the wall (a double wall with the neighbours, not an outer wall), at about 25-35 cm distance. The exhaust pipe runs vertically. I ...
0
votes
1answer
144 views

How to flatten a recessed door panel

I'm restoring the door to my dumb waiter. The door is 1" thick, plywood core, tin exterior (1/32"); the door is original and dates back to 1939. I want to make the door completely flat, then paint it, ...
0
votes
0answers
563 views

Feasibility of plywood for fence panels

I have a 4' high chain link fence that I want to block the view of the neighbor's yard. Slats would be cheap, but only offer 80% coverage. Looking for a cheap solution, would PT plywood work? Would ...
0
votes
0answers
468 views

Protecting outdoor plywood table

I have a small balcony on which air conditioning units are placed. My wife would like me to build a table over the air units, where she can grow flowers, herbs and veggies. Using what I have ...
0
votes
1answer
44 views

T-Nuts for Granite/Plywood table?

I have a 30"x50"x3/4" granite slab that I would like to use for a table. I'm thinking of putting 5/8" plywood underneath (20"x40"?) and before mounting the granite on top, inserting a few T-Nuts for ...