Questions tagged [mounting]

Attaching something to a wall. If you're using this tag, your question is probably a duplicate.

Filter by
Sorted by
Tagged with
22
votes
5answers
4k views

How do I reattach a shelf to the wall when it ripped out of the wall?

I had attached a shelf to my wall using the hardware that came with the shelf, but then it came crashing down in the middle of the night and all of my stuff came down with it. The hardware came from ...
22
votes
3answers
5k views

Mounted tv too high, OK to use same studs to remount?

I mounted a tv (60") on my living room wall too high. The heavy-duty mounting bracket uses large screws that required that I drill a 7/32" hole into the studs and used a socket wrench to tighten them ...
19
votes
6answers
10k views

How do I mount this towel rack that was ripped off the wall?

Hi one of my tenants sent me a pictures of my broken towel rack. What would be the most cost effective fix?
19
votes
4answers
2k views

Nicely mounting 2x4s to wall

I would like to make some bookshelves similar to what is seen here: My question is how to nicely mount these to the wall. Obviously I could simply angle some screws into the wall studs, however I ...
15
votes
4answers
89k views

If my wall has metal studs, is it better to anchor heavy objects through just drywall or also through the studs?

I live in an apartment that has that has metal studs. I'm considering hanging various things from the wall, including a coat rack that will span 5 or 6 studs. I've seen advice that says metal studs ...
10
votes
5answers
36k views

Should I be worried if I missed the studs while mounting my TV?

I think I missed the studs based on how easily the drill moved through the drywall. My LCD only weighs 27lbs and the mount itself is 5lbs (rated to hold 165lbs, and uses 4 8mm lag bolts). I pulled as ...
10
votes
5answers
86k views

Can I hang a TV with one stud and drywall anchors?

I have read several questions on here regarding this topic but my situation is slightly unique. I have a TV mount that is about 20" wide. The studs in my wall are 24" apart. I am mounting a 55" tv. ...
10
votes
5answers
78k views

Can metal studs support a 64" plasma TV on a swiveling mount?

Alright, I need a sanity check here. I've been tasked with mounting a 64" plasma TV with an articulating mount onto a metal stud wall in the corporate boardroom. It's the quadruple-threat with no room ...
9
votes
4answers
6k views

Pulley setup to raise a laundry drying bar levelly

I bought a bike hoist which I modified to use to raise and lower a bar that acts as a drying rack for damp clothes in my laundry room. I now have the following setup: The problem is that when I pull ...
9
votes
5answers
20k views

My house has steel “2x4s” in the walls, can I hang cabinets, a TV, or some other heavy item from them?

The question is pretty much all in the title: My house has metal "2x4's" in the walls. Can I hang cabinets or a TV directly on these metal studs? If not directly, is there something special I must do? ...
7
votes
4answers
43k views

How do I hang a shelf without drilling holes?

I'm currently living in a house in which we have clear instructions not to drill through the walls for danger of asbestos. I purchased a small projector and would like to mount a shelf to the wall, ...
7
votes
2answers
8k views

How do I mount 20 lb speakers to drywall between studs?

I have a pair of 20 lbs speakers that I want to mount to the drywall which is between two studs. How do people recommend these speakers be mounted? I would like to swivel and tilt the speakers. The ...
6
votes
2answers
2k views

Considerations for hardwiring electronics project in wall

What things will I need to consider for hardwiring a planned electronics project into the wall? The plan is a DIY smart thermostat. An LCD touchscreen panel will be flush with the wall. Attached to ...
6
votes
4answers
56k views

Can I hang a bathroom shelf with command strips or something similar?

I'm currently living in an apartment that doesn't allow me to put anything larger than a finishing nail sized hole in the wall. I have a small bathroom shelf that I would like to put up that consists ...
6
votes
5answers
23k views

How can I hang heavy objects on a wall, without leaving any marks?

Command Hooks don't hold very much weight wise and I would like to mount heavy objects - e.g. a whiteboard ... any ideas? (yes this is drywall - I cannot leave any marks in it ). context: college ...
6
votes
4answers
39k views

How to mount hooks into concrete ceiling that must be able to support several times bodyweight?

I am on the top floor of a loft apartment that used to be a factory. I want to install several hooks or some other fixture into my concrete ceiling from which I can hang gymnastic rings, a punching ...
6
votes
1answer
182 views

Can I route coaxial cable for tv through a gas fireplace?

Cable guy told me to drill a hole from outside in right through sheet metal in gas chimney to connect tv to cable mounted on mantle?
6
votes
1answer
8k views

How is a floating desk top supported against the wall?

Example of a floating desk top (courtesy of Phil Curtis): With increased height, it'd be one of simplest standing desk designs, and I am planning to do this at home. But, I am not sure how exactly ...
6
votes
5answers
41k views

How can I mount a desk on a wall with L-brackets?

I'm currently planning a new wall-mounted computer desk and intend to use something similar to this as the top: However, my end goal is for a wall-mounted desk, using L-Bracket mounts. I've never ...
6
votes
1answer
5k views

How do I mount TV through 3 layers of drywall and into studs?

I have a 65lb 46" LCD television and a Sanus "flush" style wall mount. The mount instructions suggest that it shouldn't be mounted anywhere where there is more than the thickness of a single sheet of ...
6
votes
3answers
25k views

How to attach metal knife rack to tile without ruining tile?

I'd like to attach a magnetic, metal knife rack to a tile back splash in the kitchen of my rental apartment. The tile is glazed white and the attachment points on the rack are small (about 0.9 sq in ...
5
votes
3answers
1k views

How do I secure a TV wall mount?

I have a built in area that is 21.5" deep (see attached picture). I'd like to mount a TV, but I've tried finding studs in the back wall and I think there might be one around the center, does not ...
5
votes
4answers
3k views

Mounting TV on a weird wall that has some material between the drywall and stud

So I have a strange wall construction in part of my house. I'm mounting an articulating mount, up to 55", in a stud. I took out a cable outlet and box to see the construction because I wasn't ...
5
votes
5answers
20k views

How do I install this wall mount bathroom sink?

I'm replacing a sink that was on a vanity cabinet and hoping to do as little busting through the perfectly good tile as possible. I heard a rumor that I need to make very sure that the sink is ...
5
votes
4answers
9k views

How do I mount a TV on a solid wood wall?

I have a 51.8lb Sharp Aquos LC46D85U that I'd like to mount above my fireplace. The problem is that there aren't any studs (at least none that I can find) behind my wood walls. My walls are not ...
5
votes
2answers
4k views

How do I wire my wall-mounted HD TV?

This image wall-mount setup should give a good idea of the current TV set up on the wall. I wanted to use a SmartStrip to power my TV and all the other devices (receiver, BluRay player, Wii, cable ...
5
votes
2answers
4k views

How can I remove plaster board/drywall rawl plugs?

I have used red head metal plaster board rawl plugs. The kind that flare out flat when you screw the bolt in. I now need to remove them. Is there a trick to remove them so I can reuse them or take ...
5
votes
2answers
524 views

Need help mounting a TV to the wall

I'm struggling to mount my 31kg Panasonic TH-P60ST60A 60 inch TV to the wall in my apartment and was hoping someone here might be able to give me some advice. The walls in my apartment seem to be a ...
5
votes
5answers
48k views

How can I center a TV on a wall with a centered stud?

I have a 60" Panasonic Plasma TV that weighs 81 lbs. I want to hang it on the wall using a full-motion wall mount made to handle 175 lbs. The wall is drywall with wood studs. I plan on using the 4 ...
5
votes
2answers
2k views

How can I fix a wall mounted towel hanger

A towel hanger fastened with a drywall fastener has been ripped out of the wall. How can I repair the hole and reattach the towel hanger?
5
votes
1answer
63k views

How can I mount a security camera on the outside of the house?

I'm tasked with mounting a security camera on the outside of the house and I'm not sure what would be the right way to do this. There are two basic problems: how to mount the thing and how to run the ...
5
votes
1answer
141 views

Can an electrical subpanel be directly mounted to a hvac supply plenum?

Can an electrical sub panel be directly mounted to an HVAC supply plenum. I usually see and have installed the disconnect or sub panel to the actual equipment on a wall near by or used some sort of ...
4
votes
3answers
1k views

Used circle cutter in wrong place in drywall, best repair method?

I'm mounting a TV and used a circle cutter attachment on my drill in the wrong location. I cut through 2 1/2" sheets of drywall and still have the discs of drywall. What is the best method to ...
4
votes
7answers
2k views

Coat hook rack above a wall with fuse boxes

The plan I'm planning to build and put up a coat hook rack in my flat. My plan is to simply screw 5 hooks into a solid piece of wood and then mount it on the wall. It should look something like this: ...
4
votes
5answers
128k views

How can I mount a TV when I can't find studs inside my wall?

WARNING: I'm not the greatest handyman. I bought a TV mount the other day, expecting to hang my heavy 40" TV above the fireplace. However, the instructions specifically say to first screw the mount ...
4
votes
6answers
15k views

Can I use 2x4s to extend studs so I can mount my TV?

I need to mount my 55" TV to the left of the studs. Can I do this simply by running a couple 2x4s off the studs, and then connecting the mount to the 2x4s? While I imagine this can be done for lighter ...
4
votes
4answers
8k views

How can I hang a 250 lb wooden piece of art on the wall?

I have 3x8 Brazilian Cherry timbers cut with tongue and groove that stack on top of each other to make a very large wooden piece of art to hang on my wall. I have all of the pieces glued to each other ...
4
votes
1answer
2k views

Can I use a magnet to make a hinged mirror stick to the wall?

After installing my Ikea mirror which can open like a door (in order to install small hooks on the wall behind it and hang keys and stuff), I realize it touches the wall only if I apply pressure on it,...
4
votes
3answers
7k views

How can I mount a tablet on a wall?

Expanding my music set-up, I'm planning to mount a tablet in my kitchen mostly as remote-control (for music playing on the server), but as it can also show websites and movies, it might get -...
4
votes
2answers
890 views

Screwing into the underside of countertop - can it support a little weight?

We have a space with a wide countertop set up in a space that functions as a workbench. There are no cabinets underneath. Instead, you can pull up chairs to it. There are computers there and it ...
4
votes
1answer
621 views

Is it safe to mount a medium-sized air compressor to the floor to stop or limit vibrations?

I have a 220V 6hp 33gal oil-less horizontal air compressor that aside from being noisy rattles all over the floor. Stock Image: I would like to either mount it to the floor or build a small frame/...
4
votes
1answer
4k views

Mounting a window air conditioner on top of a sliding horizontal window

I need to install a window air conditioner in my master bedroom. However, the only suitable window there is a horizontal sliding window. To complicate things more, I need to place it on top, since my ...
4
votes
3answers
2k views

Is it OK to install a TV mount when it can't be attached to a stud at all mount points?

I have a TV wall panel that can only reach two studs. I was wondering if it's fine to screw the left side and the center on studs, and have the right side anchored in the drywall. My TV is 30lbs with ...
4
votes
1answer
2k views

How much movement is normal after mounting a TV on partition wall?

I have a wall that's made of plasterboards mounted on metal studs. I have mounted two DVD cabinets (each 22kg) and an LCD TV (40kg). To mount all this, I installed 6mm thick MDF panels across 5 of ...
3
votes
2answers
6k views

Can a toilet paper holder be mounted to the side of an MDF bath vanity?

I have a one-arm Delta toilet paper holder that I want to mount to the side of our daughter's bathroom vanity which is made of MDF. The vanity side is 3/4 inch thick. I am not sure if MDF is sturdy ...
3
votes
4answers
9k views

Is it safe to hang a 39lb projector screen from a drywall ceiling without using the joists?

Is it safe to hang a 39lb projector screen from a drywall ceiling without using the joists? I'm having a debate with someone over how we should hang a projector from the ceiling. I want to place ...
3
votes
3answers
669 views

Anybody have experience in hanging a huge clock?

I need help with hanging this giant clock on the wall. Its huge and heavy. I believe its 4-5' in diameter and it weighs about 160 pounds. I figured building some sort of brace for it would be best as ...
3
votes
1answer
4k views

Will 1/4" drywall with 2x4 studs hold a TV wall mount securely?

I want to install a flat screen TV wall mount (full motion kind) into 1/4' drywall with 2x4 studs. There will be 4 attachment points, to studs 24" apart. Total weight of the wall mount and the TV will ...
3
votes
4answers
329 views

Concerns about hanging a hundred plus mugs on dry wall

Newbie here! Among other things, I collect Starbucks mugs from my travels. I have over a hundred mugs and they have spent most of their life in boxes in the garage - until now! I was thinking of ...
3
votes
3answers
712 views

How can I build a table into an alcove?

I have this weird portion of a second bedroom where about 4 foot of it is 2 feet deeper than the rest of the wall. What I want to do is fix a butcher block in that space to use as a desk. What is the ...