Questions tagged [led]

For questions regarding lighting that uses LED (Light Emitting Diode) technology.

Filter by
Sorted by
Tagged with
31
votes
3answers
319k views

Why do my LED lights stay on, even when the switch is off?

I have two LED lamps in my corridor, and when I switch them off, they keep emitting light (not very strong, but it's annoying at night). What can it be? How can I fix it?
24
votes
10answers
77k views

Why do my led bulbs state: not for use in totally enclosed luminaires?

I recently bought some nice inexepensive LED bulbs but I noticed the warning states: (see image below) not for use in totally enclosed luminaires I am guessing that it gets too hot but I find it ...
20
votes
1answer
87k views

What do I need to install LED strip lighting?

I've been looking to install LED strips, either RGB or white for lighting and ambiance. It wouldn't be the main lighting of the room, so no necessity for high power LEDs. The perimeter of the room is ...
19
votes
6answers
23k views

Can I safely use a 9w LED bulb in place of a 40w incandescent?

I bought a reading lamp that on the box says: Max 1x40W The shop also sold me an LED light bulb that says: 9W=75W So my question is, can I use light bulb or not? I am confused between the 75W and the ...
18
votes
2answers
51k views

Lutron LED/CFL Dimmer switch turns lights off the wrong way, up is down and down is up. What's the problem?

I bought the $20 Lutron Dimmer Switch (TGCL-153PH-WH) from my local big box hardware store. It dims the Cree LED bulbs great. There is just one problem... no matter how I install the wires the switch ...
14
votes
4answers
221k views

What does that mean if my LED light bulb starts blinking when I turned it on?

I have an LED light bulb: Philips 60W incandescent equivalent I've owned it for about a year and have been very happy with it. This morning when I turned it on, it started blinking. Not flickering, ...
14
votes
9answers
110k views

Can I use an LED bulb in a 3-Way fixture?

Is it possible to use an LED bulb in a 3-way light fixture? Will all three work?
13
votes
6answers
51k views

What should I do to increase the dimming range of LED bulbs?

We started doing most of our homes in LED last year. I am a big dimmer fan and would pretty much put a dimmer on any light switch. One thing that I haven't gotten down is the dimming range of the ...
11
votes
3answers
74k views

What's the difference between dimmable and non-dimmable LED lamps?

I have a large room in my house with 3 light fittings, with a total of ten 40W GU10 bulbs. So, this is using 400W when they're at max output (they're all on dimmer switches). I'm interested in ...
11
votes
3answers
2k views

Can someone explain how this makes sense electrically?

The wiring in my house is... odd. Nearly every pair of outlets has one of the outlets connected to a light switch. Sometimes that switch is quite far from the outlet even when there are other closer ...
11
votes
7answers
74k views

What exactly is a PAR type LED lamp, how does it differ from R/BR type LED & CFL lamps?

I am in the process of replacing my incandescent bulbs with more efficient alternatives. My home is about 14 years old, I've owned it for a little over three years. It seems most of the bulbs that it "...
11
votes
4answers
10k views

What are the pros and cons of LED lighting for home use?

I'm interested in installing LED lights in my home, and I'm having a dilemma between buying LED bulbs and rolling my own solution. I have some questions on how to DIY: How efficient is it? Single ...
10
votes
2answers
19k views

How can I mount an 12V transformer for LED lighting inside a wall?

The stairs to my basement has one light fixture at the bottom, and that casts a shadow on the rest of the stairs. I want to run a strip of LED lights up the crown molding or on top of the upstairs ...
9
votes
2answers
73k views

Why won't a LED bulb work in a standard light fixture?

I have a wall fixture in my Brooklyn apartment's bathroom that is my only source of light. A sticker on the fixture says that it is Max 75W. The other day, the 14W / 60W equivalent CFL that was in it ...
8
votes
5answers
28k views

Is an LED light strip safe to use under a bed?

I see a lot of RGB LED light strips being sold on sites like Amazon etc. The lights appear to be of decent quality, run off of 12V but do need up to 5-6 Amps to power. This is a lot of current, so I'...
7
votes
1answer
11k views

Why shouldn't different types of bulbs be used in the same fixture?

Why shouldn't different types of light bulbs(i.e. incandescent, LED, cfl) be used in the same fixture? I read this under the CAUTIONS & WARNINGS section of the LED bulb packaging. ...Do not ...
7
votes
2answers
11k views

How to find LED Christmas lights that look more like traditional incandescent bulbs?

We just bought some LED Christmas lights that are labeled 'warm white', but when we hook them up they look ugly in the light they emit and seem very blue in their color to me. The specific kind I got ...
7
votes
1answer
117k views

Why does an LED light turn on and off irregularly while the switch is in the on position?

We have had a LED light in the family room for several months now. In the past week it has started to act funny. We turn on the LED light and after a while it turns off and then goes back on and then ...
6
votes
2answers
7k views

What are the pros and cons of LED vs CFL vs incandescent bulbs for outdoor lighting?

I'm planning to install some light on my balcony and was just wondering what would be the best choice of lamp. I live in a relatively cold climate, and the current temperature at night is around -10°C....
6
votes
3answers
46k views

LED lights delayed when turned on

I had my house built last year and after moving in noticed that in our living room (6 led downlights) when we turn our lights on 5 turns on at once and the 6th one will be delayed ranging from 1/2 sec ...
6
votes
3answers
29k views

Can I dim LED lights when there are two different switches for the same fixture?

I would like to place dimmers in two different rooms that are sometimes a bit over lit. Is that possible when both areas have two switches for the recessed lighting? Do I need to replace both switches ...
5
votes
2answers
7k views

Can a low voltage light switch be located in a closet as opposed to outside the closet?

Okay you guys I have next question. And like all good questions this one begins with a story. I was reading the post about a nick in a wire and read a couple of you mention that light switch in a ...
5
votes
4answers
46k views

Why are my some of my LED lights flickering?

Something is causing some of my LED lights to flicker in three locations. Here are two examples: https://www.youtube.com/watch?v=4J-g2z_YtYM https://www.youtube.com/watch?v=KlbPdvkZ-BU There are a ...
5
votes
7answers
9k views

Why will 26 1.2W 220V LED lights not work with an 800W inverter?

We live off the grid and have just installed 26 220V 1.2W LED lights. We are using 220V as the batteries are some way from the house and and thick copper wire is expensive. Everything works on the ...
5
votes
5answers
12k views

What can I do to avoid incandescent bulbs for my 3-bulb ceiling fan, yet maintain brightness?

My ceiling fan takes 3 candelabra (E12) base bulbs for lighting. The bulb slots are labeled 75W - 125V. The fan light is dimmable and I currently use 3 60w incandescent flame tips. I plan to ...
5
votes
4answers
4k views

Multiple weak light bulbs vs one strong light bulb

I currently have a small room with a single CFL bulb at the center of its ceiling. The bulb lights up the whole room well enough. I encounter the problem though that when standing in front of the ...
5
votes
1answer
1k views

How do I label fluorescent fixtures converted to LED?

I am going to replace some regular fluorescent tubes that are about to burn out with LED ones and would like to add a sticker inside the fixture to advise a future owner to not install regular ...
5
votes
2answers
1k views

LED T8 tubes: plug-and-play or direct-wire?

I want to install some good bright LED lights in a shop. I have access to some nice fluorescent-type fixtures for cheap or free (two 4-ft T8 tubes), so I want to just use them with LED replacement ...
5
votes
1answer
2k views

Can I use a regular E26 LED bulb as a replacement for a refrigerator light bulb?

The light bulb in my refrigerator burned out. It was a 40w incandescent appliance bulb like such: I'm wondering if there is any reason I can not put a 9watt A19 LED bulb such as this one (home depot ...
5
votes
3answers
718 views

What is a good PWM driver for LED lighting?

I am looking at lighting options for my new flat. I'm looking for any recommendations and suggestions for the components to power and control the LEDs. If we consider the main room (i.e. the open ...
4
votes
5answers
17k views

What do I need to know about LED strip lighting?

I've read a ton of various posts about different aspects of LED lamps, strips, comparisons with fluorescent and incandescent lamps, and I decided that I want to install LED strips to light my room. ...
4
votes
8answers
18k views

Will switching to LED lightbulbs make a significant difference in my electric bill?

I asked Reliance Controls about a THP103 meter that I was having trouble with. Turns out that it's not a true RMS meter and thus is unable to give you accurate readings on a CFL or LED installation. ...
4
votes
2answers
16k views

How to prevent blinking LED on a three way Lighted switch circuit with only one light fixture?

I have a stairwell that has only one wall sconce with two switches that are lighted when off. one upstairs, and one downstairs. I recently replaced Sconce, and added an LED 60 watt bulb; I triple ...
4
votes
6answers
42k views

Why do my LED lights flash on cold start?

Whenever I flip on my dimmer switch, all four dimmable LED lamps flash on in unison, blink off, and then come on at the selected dim level. This happens even with the dimmer slider maxed out, so it's ...
4
votes
3answers
2k views

Does the Lutron Maestro C.L Dimmer Exist?

Lutron offers a family of "C•L" model dimmers (for use with dimmable CFL/LEDs) which includes the Maestro product line: http://www.lutron.com/EDUCATION-TRAINING/LCE/Pages/DimmingCFLsandLEDs.aspx#...
4
votes
3answers
11k views

Recessed LED lighting orange connectors

Installing 12 recessed light cans in the basement. Figured I'd go LED, so I purchased a dozen HALO LED housings (H750T). Then I spotted a deal on Philips LED lights and ordered a dozen from HD online. ...
4
votes
1answer
2k views

How to turn off a light sensor LED light?

I've got a light on my condo building and I'd like to figure out how to turn it off. It's currently operated by an automatic light sensor (turns off when it gets dark). I want to setup better ...
4
votes
5answers
53k views

How can I convert my under cabinet lighting from halogen to LED?

Our kitchen has under-cabinet lighting that uses halogen 20 watt G8 socket bulbs. With 15 bulbs in the kitchen that is 300 watts. I'd prefer to replace them with 3 watt LED bulbs. I've been ...
4
votes
1answer
2k views

Non-dimmable LED on dimmer. Fire hazard?

I just moved into a new home where some of the electrical appears to have been recently re-done. Nearly every light in the house has a dimmer on it, which is fine with me because I prefer to keep ...
4
votes
2answers
9k views

How do those glowing LED faucet aerators power themselves?

Do a web search for LED faucet aerator and you'll see dozens of different color-changing faucet aerators (and showers), most of which are powered just from the stream of water. How do they generate ...
4
votes
4answers
19k views

How can I tell what dimmer switch to use with LED lights?

I replaced the halogen GU10 bulbs in my kitchen with LED bulbs... I'm really pleased with the results but as the bulbs I bought are dimmable, how do I know what dimmer switch I can use? I did try ...
4
votes
1answer
4k views

What alternatives to R20 bulbs can I use?

When we bought our house, the lighting fixtures in the ceiling came with R20 bulbs. I know nothing about lighting so I figured that only R20 bulbs are compatible with our fixtures. But I'm realizing ...
4
votes
1answer
10k views

Will a non-dimmable LED work if the dimmer switch is on full?

If a dimmer switch is fitted for the room but we get non-dimmable LED lamps (GU10), I know there may be flickering problems with dimming, but will they work fine if the dimmer is turned to max?
4
votes
1answer
19k views

Trouble with LED bulbs

As incandescent & compact fluorescent light bulbs in my home have been dying, I've been replacing them with LED bulbs, as those have dropped in price considerably (the local electric company's ...
4
votes
1answer
702 views

Can an LED Driver be mounted in a Ceiling Electrical box

Can an LED Driver be mounted in a Ceiling Electrical box? I want to install a custom LED Lamp fixture to replace the existing bedroom ceiling fixture. Will it violate code to mount the LED Driver ...
4
votes
1answer
2k views

Replacing Halogen with LED bulbs

I've just purchased some 12V LED MR-16 bulbs, intending to use them to replace the existing 12V Halogen MR-16 bulbs in my bathroom. I have found, much to my chagrin, that the LED bulbs seem to have ...
3
votes
6answers
20k views

LED light bulb flickering in socket, incandescent works fine

I have a couple of outdoor light sockets with built in motion detectors. These seem to work as you'd expect with regular incandescent bulbs- you can set a timer for how long you want them to be on ...
3
votes
2answers
660 views

Is there such a thing as an actual 60W draw LED or CFL bulb?

CFL and LED lightbulbs are sold as being "40/60/100 watt equivalent". They're designed and sold as replacements for a certain wattage of incandescent lamp. I have some fixtures where I want a very ...
3
votes
3answers
26k views

How can I replace failing ballasts in recessed CFL housings if I don't have access to the attic?

I have a set of recessed CFL (4-pin) lights and a few of the ballasts are failing (CFLs fail to start randomly, even after replacing them with new sets). They are NHPSIC-626ELAT, CFL (4-pin) fixtures....
3
votes
4answers
6k views

Can you install an LED floodlight in a regular ceiling fan?

I'm considering buying this 9 Watt BR30 reflector LED bulb to replace a 60W incandescent bulb on a ceiling fan: The ceiling fan actually has 4 lights (I only need one of the lights so the other 3 ...