Questions tagged [framing]

For questions generally relating to the internal structural members of a home or other structure that form walls, ceilings and roofs, including studs, plates, headers, beams, and joists.

Filter by
Sorted by
Tagged with
0
votes
1answer
462 views

How to frame and insulate a “cold” room

I'm renovating my whole basement but I'm starting with the "cold" room as I'll be moving some mechanicals in there. The cold room is one of those old storage rooms people used to use as a pantry/...
0
votes
0answers
212 views

Method to support I joist after cutting the top flange for dryer vent?

My laundry wall lands DIRECTLY on top of an I joist in my basement. They are parallel so moving one side or another will not allow me to miss the I Joist. There is no method to vent up because a ...
0
votes
1answer
766 views

soffit to attic access on gable end?

I want to install a camera/flood light under the soffit on the gable end of the house. Note the location of red arrow in below pic. After I take off the aluminum soffit cover, will I have access to ...
0
votes
0answers
64 views

WRB (water resistant barrier) detail at eave/rake/peak of shed roofline

This question pertains to the proper detailing of WRB at the roofline of wood-frame, shed-roofed, new construction, without rafter-tail overhang. I've found little by way of Google. I've found an ...
0
votes
0answers
37 views

We have a 30in wide single door closet that we want to convert to sliding 60in closet, there is plenty of space to do this but how?

We have a closet that has a single 30in hinged door that we want to open up and install a 60in wide sliding 2 panel door. We have plenty of width and depth to remove the old door and open the wall to ...
0
votes
0answers
876 views

Strength, weight, cost comparison for Aluminum vs. Framing Lumber floor joists

I'm considering using Aluminum (I beams or other shapes) instead of Framing Lumber as the material for the floor joists in a residential remodeling job. The finished floor I intend to support with ...
0
votes
0answers
811 views

Attach Ledger to Rim Joist with peace of mind

Assuming I use a ledger board (vs freestanding...ehem) I will be attaching a ledger to my rim-joist which is an engineered heavy 1" thick OSB material. I know it's structurally sound, but, I have my ...
0
votes
1answer
708 views

Cutting joist for skewed joist hanger

Do I need to cut the joist lumber's end at an angle so that it sits flushed to the beam when installing skewed joist hanger? The below video tells me that it's not necessary. https://www.youtube.com/...
0
votes
1answer
527 views

Cosmetic fix for installing decking board when not parallel to house?

I am expanding the deck that goes very far (35 x 48 feet ~ 1000 sqft). So I am pretty sure the further end will not perfectly parallel to the house. It could be 1-2 inch off from one end to the other ...
0
votes
1answer
300 views

Does the granite countertop on my deck require separate footings?

If I want to have a granite countertop as a table on top of my deck, do I need to support the 4 corners with actual footing, like 4x4 with concrete? Or it is possible to just bold the 4 legs on the ...
0
votes
2answers
2k views

What size header do I need for a new garage service door?

I am going to cut out the wall in my garage under my stairs to build a small room. When I put up the door I have to use a header because it's a load bearing wall. Do I need to make the header out of ...
0
votes
2answers
3k views

Best practice for making headers for deep (2x8) walls

So I am working out a framing plan for an exterior wall made from 2x8s and I want to put a door in it. I plan on using two 2x12s for the header. The question is, what is the best practice for ...
0
votes
0answers
1k views

Framing half-wall in basement to full wall over exterior wall

Debating on whether this is something I can do or if I need to call in an pro. I have a basement room I'm looking to use as a theater room, and I need to finish a wall to the ceiling so I can hang a ...
0
votes
0answers
144 views

Finished basement with just painted concrete walls

I have a house from 1955, where the basement has been finished with lighting, carpet, interior walls, etc. I don't know when it was finished, only that it was so when I moved in. The strange thing ...
0
votes
0answers
33 views

Sill Plate not Lining up with Foundation Wall [duplicate]

I am in the process of building a one level home in PA. After the formed concrete walls were poured and the framing began, I noticed that on one side of the house that the sill plate was flush with ...
0
votes
0answers
114 views

Can I use braces to fix squeaky floors?

I have quite a few squeaky floors in my 6-month-old house. The main floor plywood (glued and nailed) got rained on as it was being assembled. My basement is unfinished. I would like to do some repairs ...
0
votes
2answers
1k views

Expanding closet opening to its fullest

I have a closet in my kitchen that currently acts as our pantry. It looks like any standard closet with two sliding doors and shelves on the interior. It has a header above it for two sliding doors ...
0
votes
0answers
3k views

Replacing Load-Bearing 2x4 wall with beam and posts - Basement

I would like replace a 64" section of a load bearing wall with a beam and 2 support posts. The current wall is 2x4 pressure treated sill plate on top of poured concrete, 5 2x4 vertical supports and ...
0
votes
0answers
619 views

What is the minimum thickness of an insulated bathroom wall

I am trying to build a basement bathroom in the corner of the house. Where I am, basement insulation codes are R10/13. What is the minimum that I can do to frame and insulate a wall. The two ...
0
votes
0answers
58 views

Asbestos in close proximity of floor repair

I have a floor repair to make in a 1950's home that had the large in floor central heater installed that has long been removed. The owner wants the grate removed and flooring toothed back in, matching ...
0
votes
0answers
1k views

Add floor framing using joist hangers?

I have a single story ranch where a corner of the house I believe was a car port. The roof line and walls all are framed such that it was always under the roof and considered part of the house, ...
0
votes
0answers
731 views

Can turnbuckles hold a frame in tension?

I'm building a king-sized bunk bed using a loft/joist design. Basically, I've got (see below): slats nailed into joists joists joined to headers with blind tenons headers joined to posts with blind ...
-1
votes
2answers
318 views

Does the front rim joist have the strength to support this deck?

Should I just lag bolt the ledger to the rim, or should I reinforce the rim joist with say a simpson strongtie htt4, and carriage bolt, and cut some cats to attach it? It seems that if there were a ...
-1
votes
1answer
71 views

House floors I can feel the cat walk across while sitting in a chair [duplicate]

I wrote earlier I can feel the cat walk across the floor-- while sitting in the sofa chair this has increased over the a short period of time. The cat weighs 7 lbs. This is the only house I have ...
-1
votes
1answer
76 views

Roofing for the porch

I have front porch where three roof trusses with three cross slopes form the walls. How do I build the roof that covers the opening between walls, where each wall supports a roof sloping in different ...

1
13 14 15 16
17