Questions tagged [aluminum]

The tag has no usage guidance.

Filter by
Sorted by
Tagged with
-1
votes
2answers
451 views

What thickness aluminium can be cut with a scissor?

I'm thinking of cutting some thin aluminium sheet to make some covers. I dont have a saw or skill so as a temporary solution want to use scissors or another tool(I think there is a hand tool to cut ...
0
votes
1answer
22 views

How to stop air leak in exterior door aluminum sill?

I found that one of my exterior doors are leaking cold air from beneath the door sill. The product installed is Endura Z-Articulating Cap Sill™ and Sealing System How can I seal it? Can I use ...
1
vote
2answers
434 views

Aluminum vs galvanized vs stainless tubing for fence with railing?

I'm building a simple fence that's composed of 1" or 1.5" OD x 0.065" wall x 4-ft tube soldered to a stainless steel base that's bolted to concrete. This fence will have a wood rail at the top. ...
-1
votes
3answers
143 views

What is the proper way to prep and paint aluminum siding

A portion of my home's 40 year old aluminum siding is discolored and needs to be repainted. What is the proper way to prep and paint it?
5
votes
3answers
181 views

Repair holes in galvanized sheet?

So far, I've only seen other questions around here about galvanized pipe or duct, so here's a new one for you all! I'm trying to patch up holes rusted through a telescope observatory's dome. The ...
0
votes
0answers
10 views

Aluminum awning support

Im looking to support my aluminum awning that spans 16'10". It has 4 vertical supports. I would like to eliminate the two center supports. At best it must support the weight of 2 ft of snow. ...
18
votes
8answers
40k views

What are the pros and cons of steel vs. aluminum metal roofing?

I'm considering a new roof for my suburban home. The home is about fourteen years old and the shingles are in so-so shape. We have had two leaks already and I've been told that means it is a good ...
1
vote
1answer
83 views

How do I fix aluminium edging onto an MDF board?

I bought a 12mm sheet of melamine-faced MDF to use as a (black) whiteboard (chalk pens, works nicely) and some aluminum angle to use as edging (hoping to attach it to the sides and the front). I was ...
0
votes
2answers
34 views

Window casing upgrade to plastic/pvc/vinyl/aluminum

I Just had two rooms added to the house, and I totally forgot to mention in the contract that I wanted the window casing to be plastic. (window frame? The internal part that encases the window ...
0
votes
2answers
332 views

Installing aluminum window in block wall

I have no clue how an aluminum window is fixed to a solid block wall opening,I live in South Africa and the window I bought is glazed and came with 4 lugs that slides down the edges of the frame. The ...
0
votes
0answers
7 views

Durability / weathering of screen-printed/laminated pattern aluminum siding?

There have been, for probably most of the past decade, high-end aluminum siding products with screen-printed or membrane-applied surface finishes, most or all of which that I can find seem to be wood ...
4
votes
3answers
450 views

Soldering copper pigtails to aluminum wire

As I prepare to remedy my parent's 1965 home's aluminum wiring I have investigated Copalum and Alumicon. Copalum appears to be unavailable. I've tried a few Alumicon connectors but they take a lot of ...
0
votes
0answers
22 views

J-Channel material selection: Plastic vs Aluminum

An existing building is to have the soffits corrected: The correction is to remove the laterally installed soffits and replace them with radially installed soffits. Radial soffits are the first 75% ...
1
vote
2answers
292 views

Cutting extruded aluminium with a circular saw

What kind of circular saw blade is best for safely cutting aluminium? I have some long sections of aluminium, actually hip beams from a dismantled conservatory, that are roughly T-shaped and 40 x 70 ...
0
votes
0answers
17 views

Water on the inside of corner

My secobd floor sticks out over my frist floor. I have aluminum siding on the second floor. I noticed water was coming in and down the corner piece. Its on the inside behind the j channel. The red ...
2
votes
1answer
596 views

Dirt or concrete for Aluminum fence posts?

Should I use concrete, dirt, or gravel to set aluminum fence post is disturbed soil? The soil was backfilled 9 months ago, and it may not be fully settled.
0
votes
1answer
82 views

What is this connector part called and where can I buy one?

I am trying to find a replacement for this connecting part on a ballet barre. It's kind of like a long tee clamp but internal. The poles it connects to are aluminium. Essentially 2 of the key locking ...
1
vote
1answer
113 views

New ceiling fan socket with copper wiring

I am trying to replace the lightbulb socket in a ceiling fan fixture. The wires coming from the fan are aluminum (I assume bec the wires are silver colored) the wires that came with the new socket ...
3
votes
2answers
174 views

Solar panel as a hatch and Is sleeping under a solar panel safe?

I'm looking to build a very large custom roof hatch/vent on my van. I was going to make to top out of Lexan, but then I realized I might want a large solar panel on the roof as well. I was looking at ...
1
vote
2answers
199 views

Is untreated aluminium suitable as an LED heat sink?

I'd like to have a 5m LED strip lighting directed upwards from around 1m height (would be behind a desk and other furniture). My idea was a simple U shaped aluminium profile (so it can be screwed to ...
0
votes
3answers
525 views

Correct crimping tool for these sleeves? Are these the correct sleeves?

I recently bought these aluminum sleeves for 3/16" wire, and this crimper tool. They will be used with this 1/8" wire coated to 3/16" I started using it today, and it seems the tool is too small. I ...
0
votes
2answers
90 views

Remove paint and grime from aluminum windows?

We have old all-aluminum windows, and they've worked well after decades. But they're just a tad bit dirty. Are there any cleaners that will help me clean these windows? Thanks.
0
votes
2answers
244 views

Reinforce aluminum pipe attached to wood posts in fence

I recently installed a fence where the posts are 4" x4" pressure-treated wood with an aluminum pipe rail, similar to this: fence and this, but without the wood rail: fence with wood rail I use a ...
10
votes
8answers
170k views

How can I fix a stripped hole in an aluminum piece?

I have a tripod head that is made of aluminum. In the head there is a small hole that houses a small screw that secures a quick-release plate. After some time the hole stripped and the screw no longer ...
-1
votes
2answers
493 views

Fixing broken cast aluminum?

My drill press was dropped and the table broke off. The break is shown in the picture. Nothing got bent out of shape the table part fits this break perfectly. Is there a reasonable way to re-attach ...
0
votes
1answer
41 views

will any glue bond 2 long, bendable metal components

I am trying to create stiffness on an 8-foot length of 1/4" acrylic, with minimal visual footprint. I hit on an 8-foot aluminum U-shaped channel (slips right over top of the acrylic), but it wasn't ...
1
vote
1answer
1k views

What paint to use to fill engraved letters on aluminium plate?

Basically I want to engrave letters and some symbols on aluminium box and fill them in using a paint, What paint should I use? As far as I know aluminium usually gets painted by anodazing process. ...
1
vote
3answers
6k views

How can I remove residue left after removing aluminum foil from my windows?

Let's see whether this is a question for DIY or for Chemistry. I put up aluminium foil on my windows for a few days, to test whether it was a good way to avoid the heating by the morning sun. I put ...
0
votes
1answer
651 views

How to fill and paint over chip in powder coated aluminum chair

Not sure whether due to weather/humidity changes or what, but a pretty new outdoor chair that we have has warped and cracked. It's made out of aluminum and powder coated. Whats the best remedy here? ...
0
votes
2answers
685 views

Drilling hole in Aluminum i-Beam - weakening [closed]

This is one of those things that my gut says "how could it be an issue" but am hoping someone has a more engineered answer. I have a 13k Boat Lift from Boat Lift US. Each side has two 3/8" Aluminum ...
0
votes
1answer
86 views

how can I attach screws perpendicularly to an aluminum sheet [closed]

I do not own a drill press nor a welding machine; I do own a simple drill however it is not poweful enough to penetrate through the aluminum. are there any special glue types for aluminum that can ...
3
votes
1answer
198 views

Why are my oven knobs turning pink?

I left my stove un-attended for 8 weeks and when I got back to using it, I noticed mould on one of the stove's knobs. I sprayed some white vinegar, let it sit for 5 minutes and wiped it off. Sadly, it ...
0
votes
1answer
46 views

Is there any such thing as a rectangular tripod mount or something like that? [closed]

So I bought this 20€ foldable laptop table: But I work with at least 2 external HDDs at a time, so I needed to find a way of having them "attached" to the table, too. The best, cheapest, most elegant ...
1
vote
2answers
3k views

Best way to join two vertical aluminium poles

I currently have an aluminium (aluminum?) pole that's about 1"1/8 across, and it's embedded into concrete. I need this pole taller, and can acquire exactly the same spec pipe in any length to do this. ...
1
vote
3answers
8k views

Should I choose PVC or aluminium window frames in a hot, humid climate?

I live in Bombay (Mumbai), India. I'm planning to install sliding sound-proof windows in a room. There are two common types of window frames manufactured here; one is aluminium, and the other is PVC, ...
3
votes
2answers
826 views

Is it possible to use a router to cut a slot in aluminum?

I need to cut a 1/4 inch slot in 1/4 inch inch thick aluminum. I currently have A drill press A router in a router table Carbide bits for the router My current plant is to drill the beginning and ...
0
votes
3answers
78 views

Coating copper with aluminium powder

I am about to install a copper weathervane which will also work as lightning conductor (it will be mounted on top of an earthed aluminium flagpole). Because: exposed to weather, copper will corrode ...
1
vote
2answers
714 views

Attach aluminum tube securely to base without welding/soldering?

How can I securely attach 4-ft x 1" aluminum tube to an aluminum base without having to solder/welding or glue? The aluminum base is 1/8" thick. The tubes are open on both sides, but they can be ...
1
vote
1answer
77 views

How can I recondition aluminum door sills?

I have three prehung doors with built-in aluminum door sills. They are 15-20 years old and starting to look kinda crappy. I've tried cleaning them with household cleaners but it didn't improve the ...
1
vote
2answers
425 views

Can I use pressure-treated 2x2 posts as a base for an aluminum arbor?

I plan on building an arbor with 2" square, white, tubing ( the sort used for screen rooms). I read that aluminum should not be set in concrete. What if is used 2" X 2" PT wood set in concrete and put ...
0
votes
1answer
280 views

do i add a number to alumiconn connectors when using for repair work of aluminum wiring

I have three receptacles boxes with burnt aluminum wiring. I,m going to use three port alumiconn conectors to repair outlet and join copper pigtail with two aluminum wires. I will be using one for hot,...
0
votes
1answer
1k views

Connecting Aluminum Angle using Screws

I am trying to join 2 pieces of Aluminum angles (6061, 90 degree, 1/16" thick) together using this self-driving screw: Extra-Wide Rounded Head Drilling Screws for Metal #8 1/2" length From McMaster ...
1
vote
1answer
771 views

Painting aluminum garage door

I need to repaint my aluminum garage door but want to use the right paint / process to do it. Will an oil based paint like rustoleum work? Is there a special primer that I need to get this done the ...
1
vote
1answer
264 views

What are these kind of assemble-able “Erector” sets generally known as or called?

What are these kind of "Erector Sets" generally known as? I know this is based on "Aluminium Sections". I was wondering if there is a class of products/ companies in the space that are called "...
2
votes
2answers
5k views

Is my breaker box aluminum compatible?

I have been advise to convert old aluminum branch wiring with AlumiConn connectors and maybe also in the breaker box, unless the circuit breaker is AL & CO compatible. How do I determine this? Can ...
6
votes
2answers
20k views

Where can I purchase a block of aluminium? [closed]

I'm need a 5" x 5" x 1" block of aluminium. Is this something I can buy online and are there different types of aluminum to consider? Will I have to buy a bigger piece and cut the aluminum down to my ...
1
vote
2answers
1k views

Removing Old Deck - how to patch missing aluminum siding

I want to tear off the deck and replace it with stairs down to a patio. What stops me is what to do about the "holes" it leaves in the aluminum siding. There will be small holes where the railing ...
2
votes
1answer
177 views

Aluminum to Copper run

I'm in the process of remodeling a bedroom in my house and will be replacing all the drywall. I'm contemplating the idea of replacing the aluminum wire in the room with copper. My question is can I ...
1
vote
1answer
100 views

How well does AA-8000 alloy resist pitting corrosion?

Aluminum corrosion in salty environments often takes the form of a surface pitting -- while this does little to damage the structural value of the aluminium, it can be an issue for mating contexts. ...
0
votes
2answers
77 views

Repairing broken epoxy interface on aluminum

My fridge fell over and the hinge between the freezer door and refrigerator door broke. This aluminum part is crucial, so I took the gamble of repairing it with epoxy (see image). The part held for a ...