I have a problem with this configuration and can't figure it out on my own.
Configurations I've tried:
1: Bulb1 and Bulb2 white and black wires connected to light switch black and white wires. Copper wire connected to junction. I Turn power on, turn switch on, no light.
2: Bulb1 and Bulb2 white and black wires connected to breaker white and black wires. Copper wire connected to junction. Turn on power, lights come on, but switch has no control.
Note: I have tested continuity on the switch, and its wires. There is no problem with the switch. Also the light fixture is brand new. And the light bulbs are tested working fine.
This picture above really simplified things. (took it from another thread)