I was wanting to rerun some Ethernet cable in my home. There is no Ethernet running to my living room which I want for my smart TV. For the time being, I have to run a cable from my office room to my TV and it just lays on the floor.
I also want to move some cables because I want to take an existing cable from my master bedroom, and run it to the living room. This cable goes outside to the DMARC. These walls are adjacent so it would just be a matter of pulling the cable up and dropping it down the correct wall. Doing this would allow my router to be in a more central location of the home.
However, I have one problem. I only have an attic, and it looks like this...
How on Earth do I go about rerunning cable through that mess? Do I just try to disturb the least amount of insulation? Do I make paths along where I need to go and then put the insulation back once I'm done? This almost seems like more work than it's worth, but it's something I really want to do.