4

I am seeing sparks inside my brand new drill machine. It is a 550 Watt Skil 6513 drill machine (not cordless).

Attached screenshot:

enter image description here

1) Sparks in red when I switched on

2) Here it sparks (in blue) throughout the process

I went through a few forum threads where people said sparks inside brushed drill machines are common, but all of them mentioned old drill machines and I am unsure about having sparks in a brand new machine. Could anyone clarify?

6

Typical AC line powered power tools do use universal type motors that use carbon brushes contacting with the copper poles of the rotating commutator on the motor shaft.

enter image description here

It is not uncommon to see sparks at the interface point between the carbon brush and the commutator as the motor operates. The amount of sparking will often reduce as the brushes wear in during use of the tool.

Brushes do wear down to the point of needing replacement. When brushes are replaced it is common to once again see increased sparking until the brushes wear to the shape of the commutator.

The presence of sparking should make it clear to avoid use of tools like this in an enclosed space when there is an extremely explosive environment with little ventilation.

| improve this answer | |
2

Your search within the forums gave you the right answer. Your picture gives a hint (if I zoom in) that your machines motor is of a brushed type too, so having sparks is pretty normal.

| improve this answer | |

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.