I've just purchased the this loft/attic ladder.

enter image description here

The installation instructions show that the springs must be installed while the ladder is closed (less tension in springs). Problem is even when closed its proving impossible to pull the springs by hand to link the two hooks (on either end) to the mounting brackets.

Can anyone think of a way to somehow mechanically extend the spring to allow it to be installed?

  • Can you post a picture of where the spring needs to be installed? – bib Jul 11 '16 at 22:04
  • 1
    I haven't argued with that unit, but sometimes the answer is either leverage, or running a metal tool through the hook so you can hold it with one hand on each side and put your back/weight into it... Have you checked for installation videos? Have you checked the company website to see if they have a standard answer for this FAQ? – keshlam Jul 11 '16 at 22:05
  • @bib see the link in the question for picture. Springs can be seen along the sides. They have two rods either end that hook onto the spring and then theses rods hook onto brackets. – Gaz_Edge Jul 11 '16 at 22:06
  • We need to see how the spring lines up with the attachment points when it is folded as directed. – bib Jul 11 '16 at 22:10
  • To do it mechanically A small cable come-a-long would barely know it was pulling with those springs. It may take a little rigging to find/ make an anchor point like adding an large eye bolt to attach to on one of the rafters that could be removed when done. – Ed Beal Jul 12 '16 at 13:38

This is from the Werner Ladder Co. FAQ for wood folding attic ladders:

For reattaching the springs on your model ladder you will need two people. One person will need to go into the attic and have the door closed. Once they are in overhead space and the person below is holding the ladder closed the springs will be able to carefully be removed. Please contact our customer care department at 888-523-3370 Monday through Friday 8 AM till 5 PM EST if you have any questions, or need any additional information

So... it seems to me that @keshlam's comment is correct, you need to use brute force. Get two people in the attic to help stretch the springs if you need to, while the door is held closed from below by a person standing out of the swing radius of the door and propping it up with a 2 x 4.

Or, using the above prescribed procedure for holding the door closed, have the person in the attic attach a "come-along" to the end loop of the spring and a sturdy anchor point. The spring could be easily stretched in this manner. Or fashion a block & tackle using some rope and a couple pulleys; it should be fairly easy to rig up a mechanical advantage for this. enter image description here

enter image description here

  • @Gaz_Edge: I believe Jimmy Fix-it described how to stretch a spring with any of several tools, even providing hints how to do it in place. Can you give an example of what you would like an answer to say? – wallyk Aug 12 '16 at 4:41

I just replaced the springs. I first pulled the ladder down. The metal lever system was attached to the wood ladder with a bolt. I climbed up the ladder part way, and removed the bolt. This allowed the lever system to be pushed up so installation of the new spring was very easy. After installation of the new spring, I pulled the lever system down and reattached the bolt. Then I did the other side. Trying to replace the springs in the attic with the attic ladder closed is really not possible for a mortal man.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.