I've three older, used, 1 hp, 3450 rpm, Sears/Crafstman motors to choose from to run a used 10" table saw on a 110v power. None smell burnt.
If they are all in equivalent decent shape, will they perform the same?
If not, is it possible to deduce which will perform best, or do I need to test all three?
Two have a capacitor wart for start-up, the third is labeled as "capacitor motor".
Two are 115, the other is 115/230.
One is labeled 40 degC Ambient, another 40 degC Temp Rise, the third 50 degC Cont. Temp Rise.