Do I need to leave space over top plate at eaves when adding insulation if I have a ridge vent



They make thin foam inserts for the eaves to keep the insulation from filling the eave.

An example like these.

Good luck!

| improve this answer | |

Only the top plates that have soffit vents.

| improve this answer | |

Yes & specifically for ridge vents whether or not you have eave or soffit vents. The reason is because the roof deck itself is what gets the hottest & will escape fastest. This is natural convection & your house will hate you if you get rid of it.

Conversely, in low temperatures you want house heat removed from contacting the roof deck to avoid condensation as well as ice dams on the exterior...if you're in a climate where this would apply.

| improve this answer | |

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.