My outdoor faucet is leaking. I was trying to remove the handle so I could replace the washers. I could not get the screw to budge. Now I have stripped the stuck screw. What do I do?

  • Is the screw head flush with the handle or is it round and sticking up from the handle?
    – bib
    Jul 25 '15 at 16:54
  • It is round and flush with the handle. Jul 26 '15 at 10:28

You could drill a small hole straight into the screw from above and use a screw extractor (or "ez-out"), it can be a difficult operation with varying degrees of success depending on experience and skill.

enter image description here

Or you could break off the handle, you could then get a grip on the protruding screw with pliers to remove it. The problem is you may or may not be able to procure a replacement handle.

You should probably start looking at replacing the entire faucet just in case your efforts to remove the screw are unsuccessful.

  • +1 to replacement. Get a nice ball valve hose bib and avoid washers for the foreseeable future.
    – User95050
    Jul 25 '15 at 20:48

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.